Currently unavailable
This product is not available at the moment. Check back later.
This MOLLOR Water Based Wood Stain is ideal for DIY enthusiasts looking to restore or finish wood furniture, cabinets, decks, and fences with a durable, low-odor product. Its key benefit is its all-in-one primer, stain, and sealer formula, providing a tough, water-resistant finish with minimal preparation. A potential caveat is that achieving deeper colors requires multiple applications and waiting periods.
| Colour | Black |
|---|---|
| Model Part Number | Mollor637 |
| Brand | Mollor |
This wood stain is suitable for a wide variety of wood surfaces, including furniture, kitchen cabinets, bedroom furniture, decks, fences, and outdoor garden furniture. It's designed for both indoor and outdoor applications.
No, this product is a Wood Stain & Sealer in One, meaning it combines the functions of a primer, stain, and sealer into a single product. This eliminates the need for separate coats.
The stain achieves surface dryness in approximately 4 hours, and the wood is ready for normal use around this time. Optimal hardness and performance are reached after a full 7-day curing period.
Yes, the MOLLOR Wood Stain is non-toxic and has an ultra-low VOC content due to its premium emulsion formula, making it safe for indoor use without harsh fumes or unpleasant odors.
For a deeper or richer color, apply additional layers of the wood stain. The longer you wait between coats, the deeper the color will become. Allow adequate drying time between applications.
Clean your brushes, cloths, and any spills immediately after use with soap and water. The stained surface itself can be cleaned with a damp cloth.
It provides excellent water-resistant and sealing properties, offering outstanding protection against heavy rain, frost, and UV exposure. This helps prevent wood from warping, rotting, and discoloring.
Ensure the wood surface is properly prepared and free of contaminants. Stir the stain thoroughly before and during use. Apply evenly along the grain, avoiding over-brushing. For a more uniform look, apply additional thin coats rather than one thick coat.
Check environmental conditions; high humidity or low temperatures can slow drying. Ensure adequate ventilation. Do not apply excessively thick coats, as this can impede drying. Make sure you are not applying in conditions outside the recommended temperature range.
This could indicate insufficient drying time or an overly thick application. Allow more time for curing, ensuring good ventilation. If tackiness persists, a very light sanding and a clear topcoat (if compatible) might help, or consider applying another thin coat of stain and allowing it to cure fully.
The wood surface may not have been properly prepared (e.g., not clean, greasy, or sealed). Ensure thorough cleaning and light sanding before application. If reapplying, remove any loose material first.
Setup:
Compatibility:
Care:
