Crown M1888 Oakleigh Plain Luxury Fabric Textured Wallpaper - Dusky Clay

This application method involves applying wallpaper adhesive directly to the back of the wallpaper strip, rather than to the wall.

A free match means there is no specific pattern repeat that needs to be matched between strips. You can hang subsequent strips side-by-side without needing to align a complex design, though ensuring a continuous flow of the subtle texture is still important.

While washable, this wallpaper is best suited for living areas and bedrooms. For kitchens, wallpapers specifically designed for high-moisture and grease-prone environments are generally recommended.

To determine the number of rolls needed, measure the width and height of your walls, calculate the total square footage, and consult the coverage guide on the wallpaper packaging, factoring in the pattern repeat (if applicable) and wastage for cuts.

It is generally recommended to remove old wallpaper before applying new wallpaper to ensure proper adhesion and a smooth finish. This wallpaper is strippable, which should aid in the removal of previous coverings.

The fabric-inspired texture adds a luxurious feel. While generally durable for standard interior use, it may be more susceptible to damage from sharp objects or heavy abrasion compared to smoother, vinyl-coated wallpapers. Gentle cleaning is advised.

Use a high-quality, ready-mixed or powder adhesive suitable for 'paste the paper' type wallpapers. Always follow the adhesive manufacturer's instructions for mixing and application.

Gently smooth out bubbles towards the nearest edge using a wallpaper brush or seam roller while the paste is still wet. If bubbles appear after drying, they may indicate a section where paste did not adhere properly; try to lift the edge carefully and reapply paste.

This indicates an issue with cutting or hanging the previous strip. Ensure each strip is cut to the correct length and hung perfectly straight. For a free match, slight adjustments can often be made by carefully trimming the edge of the second strip if needed, but it's best to aim for precise alignment from the start.

This usually means insufficient paste at the edges or drying too quickly. Ensure even paste coverage, especially at the top and bottom edges. Use a seam roller gently to press edges down. If the paste has dried, carefully lift the edge, apply a small amount of wallpaper adhesive, and press back into place.

Always check the batch number on each roll to ensure they match. If different batch numbers are unavoidable, try to use them on less conspicuous walls or plan their placement carefully to minimize the visual difference. It is best to purchase all required rolls from the same batch.