Polyvine Acrylic Metallic Paint - Pewter

Produces a completely realistic metal finish for interior and exterior use that does not tarnish o...

Best current price£22.16from B&Q

Colour

All Offers

3 offers from £22.16 - £68.74

View price history by clicking the chart icon.

B&QB&Q - PolyvineAcrylic Metallic PaintPewter500Ml
Free delivery in 1–3 days
£22.16
Visit shop

Product Information

Full details

This guide is for DIY enthusiasts, artists, and decorators looking to achieve a realistic, durable metallic finish. The key benefit is its easy application and long-lasting, tarnish-free metallic sheen for both interior and exterior projects. A potential caveat is the need for proper surface preparation for optimal results. Polyvine Acrylic Metallic Paint offers a deep, rich colour with fine metallic particles that can be polished to a high shine, providing a luxurious, genuine metallic look.

All features

ColourGrey
Model Part NumberMPW2000
BrandPolyvine

Extended Product Information

FAQs

Can I use Polyvine Acrylic Metallic Paint on exterior metalwork?

Yes, it is suitable for exterior metalwork like gates and railings. Ensure the surface is properly prepared and primed for optimal durability.

How do I clean my brushes after using this paint?

As it is water-based, brushes can be easily cleaned with water immediately after use.

What is the drying and recoating time?

The paint typically dries in up to 2 hours and can be recoated after just 4 hours, depending on environmental conditions.

Can this paint be polished to a high shine?

Yes, the mica pigment dries to a genuine metallic sheen that can be polished to a high shine for a luxurious finish.

Is the finish durable?

The paint is highly durable, heat and water resistant, and designed to resist tarnishing and fading for long-term beauty.

What surfaces can I apply this paint to?

It is ideal for interior walls, plasterwork, woodwork, pottery, furniture, picture frames, and exterior metalwork.

Does this paint have a strong odour?

No, the water-based formulation has a low odour, making it pleasant to use indoors.

Troubleshooting

Paint not drying correctly

Ensure application is within recommended temperature and humidity ranges. Avoid applying excessively thick coats.

Uneven metallic finish

Stir paint thoroughly before and during use. Apply in consistent, even strokes, maintaining a wet edge. Ensure proper surface preparation.

Poor adhesion or chipping

Ensure the surface was properly cleaned and prepared before application. Use a suitable primer if necessary, especially on challenging surfaces.

Tarnishing or fading over time

This product is designed to resist tarnishing and fading. Ensure the product is applied correctly and has cured fully. For exterior use, ensure adequate protection from harsh environmental conditions if possible.

Pros and Cons

Pros

  • Achieves a genuine, non-tarnishing metallic look.
  • Suitable for both indoor and outdoor use.
  • Easy to apply with good spreading properties.
  • Durable and resistant to heat and water.
  • Can be polished to a high shine for a luxurious finish.
  • Water-based formula is easy to clean up and low in odour.

Cons

  • Requires proper surface preparation for best results.
  • Coverage may vary depending on the surface and application method.
  • May require multiple coats for deep, opaque coverage.
  • Drying and recoating times need to be adhered to for optimal finish.

Setup, Compatibility & Care

Setup:

  1. Surface Preparation: Ensure the surface is clean, dry, and free from dust, grease, and any loose material. For best adhesion, prime the surface with a suitable primer, especially on porous or glossy surfaces.
  2. Stirring: Thoroughly stir the paint before use to ensure the metallic pigments are evenly dispersed.

Compatibility:

  • Suitable for a wide range of interior and exterior surfaces including plasterwork, wood, metal, pottery, and previously painted surfaces (ensure compatibility with existing paint).
  • Not recommended for direct contact with food or areas that will be submerged in water for extended periods.

Care:

  • Cleaning: Brushes and equipment should be cleaned immediately after use with water.
  • Maintenance: Once dry and cured, the finish is water and heat resistant. Clean surfaces gently with a damp cloth. Avoid abrasive cleaners.

Price History

DatePrice
Visit shop