Premium Metal Stair Rod Set - Bronze

The stair rods are pre-cut to a length of 72.5 cm.

The diameter of each stair rod is 10 mm.

Yes, all necessary brackets and fixings are supplied with the set.

Yes, the metal rods can be cut to a shorter length if required for narrower stairs. Ensure you use appropriate tools and smooth any cut edges.

The stair rods are available individually or in a pack of 13.

This range is available in Bronze, Matt Black, Satin Steel, and Antique Brass.

Clean with a soft, damp cloth. Avoid abrasive cleaners. Mild soap can be used sparingly, followed by rinsing and immediate drying.

Ensure you are using the correct rod (10 mm diameter) and that the brackets are installed parallel and at the correct spacing. Check if the rod needs to be trimmed for a tighter fit.

Verify that the brackets are firmly attached to the stairs and that the runner is properly seated within the brackets. Ensure fixings are tight and appropriate for your stair material.

Check for any burrs or obstructions on the rod or inside the brackets. Gently clean the rod and inside of the brackets. If cutting was performed, ensure the ends are smooth.

Clean with a soft damp cloth and mild soap solution. Dry immediately. Avoid harsh cleaners. For deeper tarnish, a specific metal polish for bronze may be required, used sparingly.