Dylon Hand Fabric Dye - Navy Blue

This dye is specifically designed for natural fabrics, including wool and silk. For best results, use on these materials. It may also be suitable for cotton, linen, and viscose, but always perform a test on an inconspicuous area first.

One 50g pack of Dylon Hand Fabric Dye is sufficient to dye up to 250 grams (approximately 0.55 lbs) of fabric to its full, intended shade. If your item weighs more, you will need to use additional packs accordingly.

Yes, when applied correctly, Dylon Hand Fabric Dye provides a permanent color that will not wash out. For best longevity, wash dyed items separately initially and then with similar colors in cold water.

No, Dylon Hand Fabric Dye is formulated specifically for hand dyeing applications. For machine dyeing, you would need to use Dylon's machine dye products.

Yes, adding 250g of salt to the dye bath is crucial for the dye to properly bind to the fabric fibers, ensuring a more vibrant and permanent color.

Dyeing over an existing color will result in a mixed shade. For instance, dyeing a yellow fabric with navy blue dye will likely produce a green shade. For a true navy, it's best to dye light-colored or white fabrics.

The active dyeing process typically involves about 15-20 minutes of continuous stirring, followed by 45-60 minutes of regular stirring. This doesn't include prep and rinsing time.

Ensure the fabric is thoroughly wet before immersion. Stir the fabric continuously during the initial stages of dyeing and regularly throughout the process to ensure even dye uptake. Make sure the fabric is fully submerged and not clumped together.

Check the fabric weight against the dye amount – one pack is for 250g to full shade. If dyeing more fabric, use additional packs. Also, ensure sufficient salt was added, as salt helps the dye absorb. The original color of the fabric also affects the final shade.

Always wear rubber gloves during the entire dyeing process. Protect your work surfaces with old newspapers or plastic sheeting. If skin is stained, wash immediately with soap and water. For surfaces, wipe up spills quickly before they set.

Continue rinsing the fabric under cold, running water until the water becomes clear. This may take some time, especially for darker shades. Ensure all excess dye is removed before washing.

This can sometimes happen with some natural fibers. A fabric softener can be used during the final rinse or subsequent washes to help soften the material. Ensure thorough rinsing to remove all dye residue.