Everbuild Forever Sealant - Ivory

It means the sealant forms a seal that will not degrade or fail due to water exposure over its lifespan, remaining waterproof indefinitely under normal use conditions within its intended application.

The Mould Shield technology provides guaranteed protection against black mould growth for 10 years from the date of application.

No, this silicone sealant is not designed to be painted over. It provides a flexible, waterproof finish that is best left as is.

Use a sealant smoothing tool or a wet finger (wear a glove for best results) immediately after application. A damp cloth can be used to wipe away excess.

It is recommended to wait at least 24 hours for the sealant to fully cure before exposing it to water.

While it is weather-resistant, it is primarily formulated for internal wet areas. For exterior applications subject to extreme weather, consult Everbuild's range for specific exterior sealants.

This product is available in Ivory. Other variants include Grey and White.

Ensure the surface is completely clean, dry, and free from dust, grease, soap residue, or old sealant. Porous surfaces may require priming.

Practice applying a steady bead. Use a sealant smoothing tool for a professional finish. Clean up excess immediately with a damp cloth.

Check application temperature guidelines. Ensure adequate ventilation. Curing can be delayed by very high humidity or low temperatures. Avoid water contact until fully cured (typically 24 hours).

Confirm that the mould is on the sealant surface itself and not growing behind it due to a failure in adhesion or joint integrity. Ensure proper application technique was used and that the surface was adequately prepared. The 10-year guarantee applies to mould growth *on* the cured sealant.