Ryobi 18V ONE+ 37cm Cordless Brushless Lawn Mower (Bare Tool) - RY18LMX37A-0

No, this is a bare tool. A Ryobi 18V ONE+ battery and charger must be purchased separately.

For optimal performance and runtime, Ryobi recommends using batteries with a capacity of 4.0Ah or higher. The specific runtime will depend on the battery's Ah rating and the mowing conditions.

The cutting height is adjusted using a single lever located near the wheels. Move the lever to one of the six positions (25mm to 70mm) to set your desired grass length.

Yes, the ergonomic handle folds down, and the grass catcher is collapsible, allowing for compact storage, which can include vertical storage.

The EasyEdge™ grass comb is a feature that allows the mower to cut grass right up to the edge of your lawn, reducing the need for separate line trimming along borders, fences, and flower beds.

To mulch, insert the provided mulching plug into the discharge chute opening. For bagging, remove the mulching plug and attach the grass catcher bag.

Ensure a fully charged and correctly inserted 18V ONE+ battery is used. Check that safety levers are engaged. Verify the battery contacts are clean.

Check if the cutting height is set too low for the grass length. Ensure the blade is sharp and free from damage. Clean any grass clippings from under the deck. Consider using a higher capacity battery.

The battery may be depleted; replace with a fully charged one. Check for any obstructions or blockages around the blade or motor. The mower may have overheated; allow it to cool down.

Ensure the grass catcher is correctly attached. Do not mow excessively long or wet grass, as this can clog the chute. Trim grass at a higher setting and make a second pass if needed.