ESYLUX Motion Switch - Black
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The ESYLUX RC 230i motion detector is designed for homeowners and facility managers seeking enhanced security and energy savings for outdoor lighting. Its primary benefit is automatically controlling lights based on detected motion, deterring potential intruders and reducing electricity waste. A key consideration is its specialized outdoor application, requiring appropriate mounting height and environmental conditions for optimal performance. This device offers a wide detection angle and range, remote operation capabilities, and adjustable settings for tailored lighting control.
All features
| Colour | Black |
|---|---|
| Model Part Number | EM10015519 |
| Brand | ESYLUX |
Extended Product Information
FAQs
What is the optimal mounting height for the ESYLUX RC 230i?
The optimal mounting height for this motion detector is 2.5 meters, but it can be mounted up to a maximum of 4 meters.
Can this motion detector be used indoors?
While designed for outdoor use with its IP54 rating, it can be used indoors. However, its sensitivity and wide angle might be better suited for larger indoor spaces or areas with significant movement.
What is the maximum load this detector can switch?
The maximum switching power for the ESYLUX RC 230i is 2300W.
How do I adjust the sensitivity and light level settings?
Sensitivity is adjusted via a dial on the unit. The response value luminosity (the level of darkness required for activation) is also set via a control on the device, typically ranging from 2 to 2500 lux.
Does the detector have protection against small animals or insects?
The detector has creep-under protection, meaning it can detect motion close to the unit. However, its sensitivity to very small movements can be adjusted via the sensitivity dial to minimize false triggers from small animals or insects. For specific pest deterrence, consult the manual for optimal sensitivity settings.
What does the IP54 rating mean?
The IP54 rating indicates that the device is protected against dust ingress (the '5') and protected against splashing water from any direction (the '4'), making it suitable for most outdoor environments.
How is the duration of the light controlled?
The duration is controlled by the duty cycle setting, which can be adjusted from a minimum of 15 seconds up to a maximum of 30 minutes. Once motion is no longer detected, the light will remain on for the set duration.
Troubleshooting
Motion detector does not activate lights.
Check the power connection to ensure the device is receiving 230V AC. Verify that the ambient light level is below the set response value (lx). Ensure the sensitivity is set appropriately and the detection zone is not obstructed. Confirm the maximum duty cycle has not been reached.
Lights remain on continuously.
Check the maximum duty cycle setting; it may be set too high. Ensure there is no constant motion within the detection range. Verify the sensitivity is not set excessively high, triggering on minor movements or environmental factors.
Detector is too sensitive or not sensitive enough.
Adjust the `sensitivity` dial. For higher sensitivity, turn the dial clockwise. For lower sensitivity, turn it counter-clockwise. Ensure the detection angle is appropriately aimed.
Device does not power on.
Verify the main power supply is active and correctly wired to the detector. Check the circuit breaker or fuse for the lighting circuit. Consult a qualified electrician if power issues persist.
Intermittent light activation.
This could be due to fluctuating ambient light or minor movements (e.g., branches). Adjust the `response value luminosity` to a higher setting if activating during daylight, or reduce `sensitivity` if triggered by non-human movement. Ensure the detector is not exposed to direct sunlight or heat sources that could cause false triggers.
Pros and Cons
Pros
- Provides effective deterrence against intruders through automated lighting.
- Contributes to significant energy savings by ensuring lights are only on when needed.
- Offers flexible installation options with suitability for wall and ceiling mounting.
- Wide detection range and angle ensure broad coverage.
- Durable and weather-resistant design (IP54) for outdoor environments.
- Customizable settings for sensitivity, luminosity, and duration provide tailored control.
Cons
- Requires professional installation for optimal and safe setup.
- Performance can be affected by extreme weather conditions beyond its IP54 rating.
- Relies on AC power, necessitating proximity to a power source.
- Best suited for outdoor use; indoor application may be overly sensitive or unnecessary.
- The 2.5m optimal mounting height might not be feasible for all locations.
Setup, Compatibility & Care
Setup:
- Mounting: Choose a location on a wall or ceiling with a clear line of sight to the area requiring detection. The optimal installation height is 2.5 meters, with a maximum of 4 meters. Ensure the mounting surface is stable.
- Wiring: Connect the device to a 230V AC power supply using the screwed terminal connection. Ensure all electrical work is performed by a qualified electrician and complies with local regulations.
- Configuration: Adjust the `sensitivity` dial to match the detection needs of the area. Set the `response value luminosity` (2-2500 lx) to determine the ambient light level required for activation. Set the `minimum switch-on time` (15s) and `maximum duty cycle` (30min) for desired light duration.
- Teach-Function: Utilize the teach-function for precise parameter setting if needed, following specific instructions in the product manual.
Compatibility:
- Power: Requires a standard 230V AC, 50-60Hz power supply.
- Lighting Control: Compatible with most standard lighting circuits with a maximum switching power of 2300W. It is designed to switch lighting loads.
- Environment: Rated IP54 for protection against dust and splashing water, suitable for outdoor use under moderate conditions.
Care:
- Cleaning: Periodically clean the detector's lens and housing with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, which can damage the plastic.
- Inspection: Regularly check for any obstructions in front of the sensor or signs of damage. Ensure wiring connections remain secure.