Best current price£8.50from The Range
Shopping.co.uk recommended and popular offers
The Range£8.50Visit shop Jrp Riveting Products 3.2 X 16Mm Aluminium/Steel Dome Head - Jrpclasd3216wh - Box Of 500 - Grey
Visit shopThe Range£10.98Visit shop Jrp Riveting Products 4.8 X 22Mm Aluminium/Steel Dome Head Rivets Ral 9016 White Jrpclasd4822wh Box - Grey
Visit shop40 offers from £8.50 - £12.69
View price history by clicking the chart icon.
The JRP Riveting Products 4.0 x 6mm Dome Head Rivets are designed for DIY enthusiasts and trade professionals seeking a reliable, permanent fastening solution for light-to-medium duty metal assembly. These white-finished rivets offer a clean, aesthetic look while providing high-strength holding power; however, users should ensure they have a compatible rivet gun, as these manual fasteners require specific tooling for proper installation.
| Colour | White |
|---|---|
| Model Part Number | 1320284 |
| Brand | JRP Riveting Products |
A 4.1mm or 4.2mm drill bit is generally recommended to provide the necessary clearance for a smooth insertion.
They are specifically designed for metal-to-metal or metal-to-rigid-plastic assemblies; they are not recommended for direct wood fastening.
While the white finish offers a layer of protection, they are susceptible to rust if exposed to harsh, wet, or saline environments over long periods.
Yes, but you will need to drill out the center of the rivet using a drill bit slightly smaller than the rivet body diameter.
Yes, a standard manual hand riveter or a pneumatic rivet gun is required to pull the mandrel and set the rivet.
Ensure the hole is not too large and that the rivet gun is held perpendicular to the surface during the pulling process.
Check that the rivet tool is compatible with 4.0mm rivets and that the nose piece is tightened correctly.
For optimal results, ensure your rivet tool is equipped with a 4.0mm nose piece. Always use a drill bit that matches the rivet diameter; using an oversized hole will result in a loose fit and potential failure. These rivets are weather-resistant due to their finish, but they are primarily intended for indoor or protected outdoor use. When storing, keep the rivets in a dry environment to prevent surface corrosion on the steel components. If the rivets are used on exterior projects, consider applying a small amount of sealant around the head to further prevent moisture ingress.
