Furnished Blackout Roller Blinds With Triple Square Eyelets And Metal Fittings - Grey Trimmable (W)55Cm (L)165Cm

The fabric width will be approximately 50.5cm (55cm - 4.5cm) to accommodate the fittings.

These blinds are specifically designed to be trimmable in width. The length is fixed at 165cm and cannot typically be trimmed without compromising the mechanism.

Dust regularly with a dry cloth. For stains, use a slightly damp cloth with mild soap and water. Avoid soaking the fabric.

Typically, you will need a drill, screwdriver, measuring tape, pencil, and possibly a spirit level. The mounting hardware is usually included.

The product description specifies 'Grey', which is a neutral shade. For precise color matching, referring to the product's visual representation or ordering a sample is recommended.

Yes, they can be fitted inside or outside a window recess. If fitting inside, ensure you account for the bracket depth and the 4.5cm reduction in fabric width.

The triple square eyelets are a design feature that adds a modern aesthetic to the blind and provides reinforced points for the hanging mechanism.

Ensure the fabric was trimmed with a very sharp blade and a precise straight edge. Check that the mounting brackets are perfectly level.

Check for any obstructions in the roller tube. Ensure the blind is correctly seated in its brackets. A small amount of silicone spray on moving parts might help if they are dry.

Allow the blind to hang for a few days; gravity often helps minor creases fall out. For stubborn creases, a very low-heat iron with a protective cloth might be used with extreme caution, but test on an inconspicuous area first.

Ensure the chain is not tangled and is properly seated within its guides. Clean any dust or debris from the chain and mechanism.