Lian Li LANCOOL 206 Mid-Tower ATX Case - Black - LANCOOL 206RX
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for PC builders and gamers looking to enhance their system's aesthetics and performance with the Lian Li LANCOOL 206 Mid-Tower ATX Case. The LANCOOL 206 offers exceptional airflow, vibrant RGB lighting, and ample space for components, making it an ideal choice for a high-performance build. Keep in mind that while the case supports various cooling options, you'll need to purchase fans separately.
All features
| Colour | Black |
|---|---|
| Model Part Number | LANCOOL 206RX |
| Brand | Lian Li |
Extended Product Information
FAQs
How many fans does the LANCOOL 206 support?
The case supports up to 9 x 120mm fans: 3 in the front, 3 on the top, and 1 in the rear.
Does the case come with fans?
Yes, the LANCOOL 206 includes two 160mm ARGB PWM fans in the front.
What size radiators can the case support?
The case supports up to 360mm radiators on both the front and top panels.
What type of motherboard can I use?
The case supports ATX, Micro-ATX, and Mini-ITX motherboards.
How do I control the RGB lighting?
The LANCOOL 206 includes a built-in fan controller to change the lighting modes.
What is the maximum GPU length supported?
The case supports graphics cards up to 386mm in length.
What is the warranty?
Please refer to the Lian Li warranty information.
Troubleshooting
PC not powering on.
Check the power supply switch, ensure the power cable is securely connected, and verify the power outlet is working. Also, double-check all internal connections.
Fans not lighting up or spinning.
Ensure the fan connectors are properly connected to the fan controller or motherboard. Check the power connectors to the fans. Confirm that the RGB controller is powered if applicable.
Overheating issues.
Verify that all fans are running correctly. Clean any dust filters and ensure proper airflow. Consider upgrading cooling solutions.
USB ports not working.
Check the front panel USB connector is correctly connected to the motherboard. Test different USB devices to identify any device-specific issues.
Pros and Cons
Pros
- Excellent airflow with included 160mm RGB fans.
- Stylish design with a tempered glass side panel.
- Supports large GPUs up to 386mm in length.
- Includes anti-sag bracket for GPU support.
- Good cable management options for a clean build.
- Supports both air and water cooling solutions
Cons
- Fans are not included with the case.
- Limited 3.5" HDD support.
- May require additional fan purchases for optimal cooling.
- RGB control is limited to the case's controller.
Setup, Compatibility & Care
Setup
- Motherboard Installation: Install your motherboard using the included standoffs. Ensure correct alignment.
- GPU Installation: Install your graphics card, making sure to use the anti-sag bracket to support it.
- Drive Installation: Mount your SSDs and HDD in the designated bays.
- Fan and Radiator Installation: Install fans or radiators in the appropriate locations (front, top, rear).
- Power Supply Installation: Place the power supply unit in its designated area at the bottom of the case.
- Cable Management: Route and secure cables using the provided tie-down points.
Compatibility
- Motherboards: ATX, Micro-ATX, and Mini-ITX form factors are supported.
- GPUs: Maximum GPU length of 386mm.
- CPU Coolers: Maximum CPU cooler height of 170mm.
- PSU: Supports ATX power supply units up to 220mm long.
Care
- Dust Cleaning: Regularly clean the front mesh and filters to maintain optimal airflow. Use a soft brush or compressed air.
- Tempered Glass: Clean the tempered glass panel with a microfiber cloth and glass cleaner.
- General Maintenance: Periodically check and tighten any screws or components.