Stonelux Fireplace Paint - Bowood 55 - Brown
Best current price£9.78from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£9.78Visit shop B&Q - Fireplace Paint 130Ml Sample Pot Bowood 55 Stone Effect Heat Resistant Paint
Visit shopB&Q£9.78Visit shop One Offer
1 offer from £9.78
View price history by clicking the chart icon.
B&QB&Q - Fireplace Paint 130Ml Sample Pot Bowood 55 Stone Effect Heat Resistant Paint
Free delivery in 1–3 days
£9.78
Visit shop
Product Information
Full details
The Stonelux Fireplace Paint in Bowood 55 (Brown) is for homeowners looking to achieve a realistic stone effect on their fireplace surrounds, back panels, hearths, or inglenook recesses. Its key benefit is providing the aesthetic of natural stone at a significantly lower cost than real stone. A potential consideration is that it is designed for decorative purposes and heat resistance up to a certain level, not as a primary fireproofing material.
All features
| Colour | Brown |
|---|---|
| Model Part Number | BOWOOD 55 |
| Brand | Stonelux |
Extended Product Information
FAQs
Can I use this paint on a wall not near a fireplace?
Yes, while designed for fireplaces, it can be used on any suitable interior wall where a stone effect is desired, provided it is clean and dry.
How many coats of paint are typically needed?
The number of coats required will depend on the surface and the desired finish. It is recommended to apply thin, even coats and allow each to dry fully before applying the next, usually two to three coats are sufficient for good coverage.
Is this paint suitable for direct contact with flames?
No, this paint is heat resistant for use in areas around fireplaces and stoves but is not designed for direct contact with open flames or as a fireproofing barrier.
What is the drying time?
The paint is quick drying. Specific drying times for recoating and full cure will be detailed on the product's packaging, but typically recoating can be done within a few hours.
Can I spray this paint?
Yes, the paint can be applied using a spray gun. Ensure you follow the manufacturer's guidelines for thinning and spray settings, and always use appropriate safety equipment.
What is the weight of one tin?
The product weighs approximately 0.44 pounds (0.2 kg).
How do I clean up after using the paint?
Clean brushes, rollers, and spray equipment immediately after use with water.
Troubleshooting
Uneven coverage or streaking
Ensure the paint is thoroughly stirred before and during application. Apply thin, even coats and avoid overloading the brush or roller. Allow proper drying time between coats.
Paint not adhering properly
Verify that the surface was properly prepared – clean, dry, and free from dust, grease, or peeling previous finishes. Ensure adequate drying time has passed.
Color not as expected
The ground stone aggregate can lead to slight variations. Test in an inconspicuous area first. Ensure adequate light for accurate color assessment during application.
Surface feels chalky after drying
This may indicate insufficient stirring or an issue with surface preparation. Ensure the surface was clean and dry before application and stir the paint thoroughly.
Pros and Cons
Pros
- Creates a convincing natural stone effect.
- Significantly more affordable than real stone.
- Easy to apply with common decorating tools.
- Heat resistant for safe use around fireplaces.
- Simple to clean and maintain.
Cons
- Not a substitute for professional fireproofing materials.
- Requires adequate ventilation during application.
- May require multiple coats for full coverage.
- Color may vary slightly from batch to batch.
Setup, Compatibility & Care
Setup:
Ensure the surface to be painted is clean, dry, and free from dust, grease, and loose material. Apply using a brush, roller, or spray in a well-ventilated area. Allow adequate drying time between coats as recommended on the product packaging.
Compatibility:
Suitable for use on fireplace surrounds, back panels, hearths, inglenook recesses, and walls around gas, electric, and wood-burning stoves. It is designed for surfaces exposed to higher temperatures but is not a primary fireproofing material.
Care:
To clean, use the brush attachment of your vacuum cleaner to remove dust. For more stubborn dirt or marks, use a soft-bristled brush with a mild soap and water solution. Always ensure the surface is dry after cleaning. Wash used brushes and rollers immediately with water.