Best current price£118.00from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£118.00Visit shop Lubluelu Robot Vacuum Cleaner With Mop 4000Pa, 2 In 1 Robot Vacuum, Lidar Navigation, 5 Real-Time Mapping,10 No-Go Zones
Visit shop2 offers from £118.00 - £226.98
View price history by clicking the chart icon.
The Lubluelu Robot Vacuum and Mop (SL68) is designed for busy households seeking automated, deep cleaning with minimal daily intervention. Its key benefit is the hands-free operation, thanks to the self-emptying station that holds up to 60 days of dust. A potential caveat for some users is its reliance on a 2.4GHz WiFi network for smart app and voice control features. This device combines powerful 5500Pa suction, LiDAR navigation for efficient cleaning, and a 3-in-1 vacuum, sweep, and mop function.
| Colour | Black |
|---|---|
| Model Part Number | SL68 |
| Brand | Lubluelu |
The 2.5L disposable dust bag in the self-emptying station can hold dust for up to 60 days, depending on your home's cleanliness and pet hair levels. You will be notified via the app when it's time to replace the bag.
Yes, the LiDAR navigation system supports multi-floor mapping. You can save maps for different levels of your home in the Smart Life app.
No, the robot vacuum requires a 2.4GHz WiFi network for initial setup and smart control features. It is not compatible with 5GHz networks.
The robot vacuum features a powerful brushless motor with up to 5500Pa suction, designed for deep cleaning of dust, pet hair, and debris on various floor types.
Yes, through the Smart Life app, you can define specific rooms or areas for cleaning and set virtual 'no-go zones' to prevent the robot from entering certain areas.
The mop pad should be washed after each use and replaced periodically. Ensure the water tank is clean and filled with water (and approved cleaning solution if applicable, check manual). The water flow can be adjusted via the app.
The robot automatically detects carpeted areas and increases suction power for a deeper clean. It can also lift or disengage the mopping system when transitioning onto carpets, depending on the specific model's capability.
Ensure the station is powered on and has sufficient clearance. Check that the robot's charging contacts and the station's contacts are clean. Verify the robot is within range of the station.
Confirm your WiFi network is 2.4GHz and that the robot is within range. Try restarting the robot and your router. Ensure you are using the correct 'Smart Life' app.
Clean or replace the HEPA filter. Check the robot's dustbin and empty it if full. Ensure there are no blockages in the suction inlet or the hose leading to the self-emptying station.
Check for and remove any obstacles, loose cables, or high-pile rugs that may be causing issues. Ensure the room map in the app is accurate and try setting no-go zones if needed.
Ensure the water tank is filled correctly and the mop pad is properly attached and damp. Adjust the water flow setting in the app. For stubborn stains, pre-treat or perform a separate manual mop.
Initial Setup:
App Connection:
Compatibility:
Care Instructions:
