Best current price£14.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£14.99Visit shop B&Q - Radiator Paint Anthracite Satin 400Ml
Visit shop
DIY Refurb UK£14.99Visit shop Best Ideas Uk Light Pro-Spray Radiator Paint | 3-In-1 Heat Resistant Spray
Visit shop6 offers from £14.99 - £29.99
View price history by clicking the chart icon.
The Pro-Spray Radiator Paint is designed for DIY homeowners looking to refresh metal fixtures like radiators, towel rails, and water tanks without the hassle of multi-step painting processes. Its primary benefit is the 3-in-1 formula that eliminates the need for separate primers or undercoats, offering a durable, heat-resistant finish that resists yellowing; however, users should be aware that it cannot be used on polished chrome or stainless steel surfaces.
| Colour | Grey |
|---|---|
| Model Part Number | sku-56317870997883 |
| Brand | Best Ideas UK |
No. You must turn the radiator off and allow it to cool completely to room temperature before application. Heat it only after the paint has fully cured.
No, this product will not adhere properly to polished chrome or polished stainless steel.
No, the 3-in-1 formula acts as its own primer, undercoat, and topcoat.
For best results, apply two to three light, even coats rather than one thick layer, allowing for the recommended drying time between coats.
It is engineered to withstand constant temperatures of up to 100°C.
Yes, this paint is suitable for hot water tanks, provided they are not polished stainless steel.
You are holding the can too close to the surface or applying too much paint at once. Use lighter, faster passes and keep the nozzle further away.
This is often due to 'overspray' settling on the surface. Ensure you are working in a draft-free environment and do not spray from too far away.
The surface likely wasn't cleaned properly. Ensure all oil, grease, and loose debris are removed before initial application.
Before starting, remove any loose rust or flaking old paint with a wire brush or fine-grit sandpaper, then wipe the surface clean with a degreaser. This product is ideal for most metal radiators and interior metal fixtures, but it is strictly incompatible with polished chrome or stainless steel surfaces. Store the canister in a cool, dry place away from direct heat sources when not in use. Ensure the room is well-ventilated during and after the application process until the smell has dissipated.
