Kasp Graphite Powder - 50g

Apply the powder when you notice the lock is becoming difficult to operate. The frequency depends on the environment and usage, but typically every few months or as needed.

While suitable for many locks, it is primarily designed for locks that benefit from dry lubrication. Always test on a small area first.

Yes, it is non-toxic. However, avoid contact with skin and eyes. Always follow the instructions on the product label.

If the powder gets wet, it may clump and lose effectiveness. Allow the lock to dry completely before reapplying the powder. Consider using a weather-resistant cover for locks exposed to the elements.

Use a suitable solvent or degreaser to remove any old grease or oil. Ensure the lock is completely dry before applying the graphite powder.

Gently try to wiggle the key while applying slight pressure. If it's still stuck, reapply a small amount of powder and try again. Avoid forcing the key.

A little goes a long way. Start with a small amount and work the key in and out of the lock. Avoid over-application, as this can lead to buildup.

Ensure the lock is clean from old lubricants. Reapply the powder, working the key in and out of the lock several times. Repeat the process.

Ensure the container is properly sealed. Gently tap the container to loosen the powder. If the problem persists, the powder may have absorbed moisture; replace the product.