Primary Pro Protective Sleeving - 35mm - 1mtr

Name: Primary Pro Protective Sleeving - 35mm - 1mtr
Brand: Primary Pro
SKU: 72igrogjsc
Availability: InStock

The PrimaryPro 35mm Protective Sleeving delivers precision-engineered protection for insulated pip...

Best current price£11.70from Bradfords

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Bradfords£11.70Visit shop

Primary Pro 35mm Protective Sleeving for Insulated Pipework 1m Length

Visit shop

All Offers

2 offers from £11.70 - £15.26

View price history by clicking the chart icon.

BradfordsPrimary Pro 35mm Protective Sleeving for Insulated Pipework 1m Length

£25.00 delivery

£11.70

Visit shop

City Plumbing GBPrimary Pro 35Mm Sleeve Ps035

Free delivery in 1–3 days

£15.26

Visit shop

Product Information

Full details

The PrimaryPro 35mm Protective Sleeving is designed for professional plumbers and heating installers needing to protect insulated pipework passing through walls. Its key benefit is providing a precise fit for 35mm insulated pipes, preventing damage from debris and moisture, thereby ensuring system integrity. A potential caveat is its specific sizing, meaning it's intended only for 35mm pipes and requires compatibility with the Bond & Seal system for optimal moisture and heat loss prevention.

All features

Model Part Number	ps035
Brand	Primary Pro

Extended Product Information

FAQs

What is the exact purpose of this protective sleeving?

The sleeving protects insulated pipework from physical damage, debris, and corrosive elements like cement acids when passing through walls, and helps prevent heat loss and moisture ingress when used with a sealing system.

What size pipe does this sleeve fit?

This sleeve is precisely engineered to fit 35mm diameter insulated pipes.

Can I use this on uninsulated pipes?

No, this sleeve is designed specifically for insulated pipework and may not provide adequate protection or fit for uninsulated pipes.

Is the Bond & Seal system included?

The Bond & Seal system is a compatible accessory and is typically sold separately. Refer to the product packaging or supplier for details.

What is the length of the sleeve?

The sleeve comes in a 1-meter length.

How does this sleeve prevent heat loss?

By creating a sealed barrier around the pipe penetration, it minimizes air gaps and drafts. When used with the Bond & Seal system, it further enhances the seal, preventing thermal energy from escaping the building.

Can I cut the sleeve to a shorter length?

Yes, the sleeve can be cut to the required length using appropriate cutting tools. Ensure cuts are clean and straight.

Troubleshooting

Sleeving is too tight or too loose on the pipe.

Ensure you are using the correct size sleeve (35mm) for the specified insulated pipe diameter. This product is precision-fit for 35mm pipes; variations may indicate an incorrect pipe size or an issue with the pipe's insulation layer.

Difficulty in sealing the sleeve to the wall.

Ensure the wall surface around the penetration is clean and dry. Use the compatible Bond & Seal system as instructed by its manufacturer for optimal adhesion and sealing.

Sleeving appears to be damaged.

Inspect the sleeve for cracks or tears before installation. If damage is found, do not install and replace the sleeve. Contact your supplier for a replacement.

Pros and Cons

Pros

Provides exact fit for 35mm insulated pipes, avoiding common sizing problems.
Offers protection against physical damage and chemical exposure (cement acids).
Helps prevent moisture ingress, crucial for preventing corrosion and system failure.
Compatible with Bond & Seal system for enhanced sealing and thermal insulation.
Engineered for professional use, ensuring reliability in demanding installations.

Cons

Only compatible with 35mm diameter insulated pipes.
Requires the Bond & Seal system for maximum effectiveness in sealing.
Not suitable for uninsulated pipes or pipes of different diameters.
One-meter length may require cutting for shorter wall penetrations.

Setup, Compatibility & Care

Setup:

Slide the 1-meter length of PrimaryPro Protective Sleeving onto the 35mm insulated pipe before passing it through the wall.
Ensure the pipe is centered within the sleeving.
Once the pipe is positioned through the wall opening, the sleeve should sit flush against the wall surface.
For optimal performance and sealing, apply the compatible Bond & Seal system around the edges of the sleeve where it meets the wall.

Compatibility:

This product is specifically designed for 35mm diameter insulated pipes.
It is compatible with the patented Bond & Seal system for sealing.
Not designed for use with uninsulated pipes or pipes of other diameters.

Care:

The sleeving itself requires no active maintenance after installation.
Clean the exterior of the installed sleeve with a damp cloth if necessary. Avoid abrasive cleaners.
Periodically inspect the seal integrity, especially if using the Bond & Seal system, to ensure continued protection.