ProWarm Insulation Fixing Pack - 25mm

The pack includes 100 screws (in 25mm, 30mm, 42mm, and 60mm lengths) and 100 washers.

A Pozi Drive screwdriver or drill bit is required.

No, this pack is designed for use with timber floors only.

Choose the screw length that suits the thickness of your insulation board, ensuring it adequately secures the board to the timber floor without protruding.

Yes, the screws are coated for corrosion resistance.

If a screw head strips, stop driving and use a new screw. Ensure you are using the correct size Pozi Drive bit.

Store the remaining screws in a dry place to prevent corrosion.

This pack is specifically designed for installing insulation boards on timber floors. Other applications are not recommended.

Ensure the correct size Pozi Drive bit is used and apply even pressure. If the head is stripped, use a different screw.

Use a shorter screw length or carefully trim the screw if it is slightly too long. Do not overtighten.

Pre-drill pilot holes if the timber is particularly hard or dense.