OKODOKO Replacement Backing Pad for Makita Orbital Sanders - 5 Inch

This pad is designed for specific Makita 5-inch orbital sander models. Please refer to the compatibility list in the 'Setup, Compatibility & Care' section to confirm if your model is supported.

This pad features a hook and loop system. Simply align the sanding disc with the pad and press firmly to attach. Ensure the disc is centered for best results.

Replacement frequency depends on usage. Look for signs of wear, such as a worn hook and loop surface, cracks in the pad, or excessive vibration during use, which indicate it's time for a replacement.

This product includes one replacement backing pad. It is designed to use the original screws from your Makita sander for attachment.

The backing pad has a diameter of 5 inches (125mm).

Yes, this pad features eight dust extraction holes designed to work with your sander's dust collection system, helping to minimize airborne dust.

Ensure the hook and loop surfaces on both the pad and the sanding disc are clean and free of dust or debris. Inspect the pad's hook and loop for wear; if excessively worn, the pad may need replacement.

Verify that the backing pad is securely attached to the sander's base and that the sanding disc is centered and properly affixed. Check for any foreign objects lodged in the dust extraction holes or near the motor.

Confirm that all eight dust extraction holes on the backing pad are clear. Ensure your sander's dust bag or vacuum system is properly connected and not full.

Check that the screws attaching the backing pad to the sander are tightened securely. If the mounting holes on the pad are stripped, the pad may need to be replaced.