Ft Paints Texture Paint - 2750ml - Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Polyurethane Texture Paint is designed for professionals and DIY enthusiasts seeking a durable, semi-gloss textured finish for industrial machinery, components, tools, and steel structures. Its key benefit is providing a protective, defect-hiding coating that enhances appearance and withstands harsh environments. A potential caveat is the need for proper ventilation and protective gear due to its 2K formulation.
All features
| Colour | Blue |
|---|---|
| Model Part Number | FT-PU300-P1.90L-H0.48L-T0.37L-M-CV |
| Brand | FabioT. |
| Container Volume | 2750 |
Extended Product Information
FAQs
What is the best way to prepare the surface before applying this paint?
Surfaces must be clean, dry, and free from grease, oil, rust, and loose paint. Mechanical cleaning (sanding) or degreasing may be necessary. For bare metal, a compatible primer is highly recommended for optimal adhesion and corrosion protection.
How do I mix the 2K components?
Refer to the specific instructions on the product packaging for the exact ratio of paint, hardener, and thinner. Mix thoroughly using a mechanical stirrer or by hand until uniform. Once mixed, the product has a limited pot life.
What are the recommended application methods?
This paint is suitable for application with spray guns (conventional, HVLP) or airless spray equipment. Ensure your equipment is clean and set up correctly for the viscosity and type of coating.
Is this paint suitable for indoor use?
Yes, it can be used indoors, but proper ventilation is crucial during application due to the 2K formulation. It's particularly well-suited for areas like workshops or industrial spaces where durability is key.
How long does the mixed paint last?
The pot life (working time) of the mixed paint is limited and varies depending on temperature. Always check the product's technical data sheet for the specific pot life after mixing.
What kind of protective equipment should I wear?
When applying 2K polyurethane paints, it is essential to wear appropriate personal protective equipment, including a respirator with organic vapor cartridges, safety glasses or goggles, and chemical-resistant gloves.
Can I apply this paint over existing paint?
It depends on the type of existing paint. If the existing paint is sound and well-adhered, light sanding to provide a key may be sufficient. However, for best results and compatibility, consider a primer suitable for the substrate and topcoat.
Troubleshooting
Paint not curing or hardening properly
Ensure the correct ratio of paint to hardener was used. Verify the hardener is within its shelf life. Check that the ambient temperature is within the recommended range for curing.
Poor adhesion to the surface
The surface may not have been properly prepared. Ensure it was clean, dry, and free of contaminants. Consider using a compatible primer if applying to bare metal or difficult substrates.
Uneven or inconsistent texture
Adjust spray gun settings (pressure, tip size) and maintain a consistent distance and speed during application. Ensure thorough mixing of the paint and any additives.
Runs or drips during application
Apply thinner coats rather than one heavy coat. Reduce spray gun distance or increase application speed. Ensure the paint viscosity is appropriate for the application method.
Bubbling or pinholing
Ensure the surface is completely dry before painting. Check for moisture in the compressed air supply if using a spray gun. Avoid applying in excessively humid conditions.
Pros and Cons
Pros
- Provides a durable, defect-hiding textured finish.
- Excellent resistance to UV, weather, chemicals, and solvents.
- High adhesion ensures long-lasting performance on metal.
- Impact resistant for protection in demanding environments.
- Suitable for a wide range of industrial and commercial applications.
Cons
- Requires a 2K mixing process, necessitating careful measurement.
- Proper ventilation and personal protective equipment are essential due to chemical components.
- May require specific application techniques for optimal texture results.
- Thinner is included in the kit, but other application tools may be needed.
- Not intended for consumer-grade decorative applications without consideration for its industrial nature.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system, meaning the paint and hardener must be mixed in the correct ratio before application. Refer to the product packaging for the exact mixing proportions (typically 1.90 L Paint : 0.48 L Hardener : 0.37 L Thinner for the 2.75L kit). Ensure thorough mixing with a mechanical stirrer or by hand for several minutes. Apply within the pot life specified by the manufacturer after mixing.
Compatibility: This paint is designed for application on properly prepared metal surfaces, including industrial machinery, components, lockers, tools, and steel structures. Ensure surfaces are clean, dry, and free from grease, oil, rust, and old paint. A suitable primer may be required for optimal adhesion, especially on bare metal.
Care: To maintain the finish, clean surfaces with mild detergents and water. Avoid using abrasive cleaners or solvents that could damage the coating. For routine maintenance, a damp cloth is usually sufficient. Ensure good ventilation during application and when the coating is curing.