Best current price£18.77from The Range
Shopping.co.uk recommended and popular offers
The Range£18.77Visit shop Jrp Riveting Products 4.0 X 25Mm A2 Stainless Steel Dome Head Rivets - Jrpssd4025 - Box Of 250 - Grey
Visit shop40 offers from £18.77 - £30.65
View price history by clicking the chart icon.
Designed for both DIY enthusiasts and professional tradespeople, these JRP Riveting Products 3.2 x 8mm dome head rivets provide a robust and permanent metal-joining solution. They offer superior holding strength and a clean, aesthetic finish for various industrial and personal repair tasks, though users should ensure they have a compatible rivet gun and the correct hole diameter for a flush fit.
| Colour | Silver |
|---|---|
| Model Part Number | 5014196634661 |
| Brand | JRP Riveting Products |
These specific rivets have a 3.2mm shank diameter.
While designed for metal, they can be used for plastics if a backing washer is used to prevent the rivet from pulling through the softer material.
A 3.3mm drill bit is generally recommended for a 3.2mm rivet to allow for a snug fit.
The rivets are durable, but if used in high-corrosion or marine environments, consider applying a corrosion-resistant coating or using stainless steel variants if available.
Yes, you will need a standard pop rivet gun to set these fasteners.
Check that the rivet tool is fully seated against the head and that the internal jaws of the gun are free of debris.
Verify that the pre-drilled hole size is correct and that the total thickness of the materials being joined is within the 8mm rivet capacity.
The hole may be too large; use a smaller drill bit or a backing washer to distribute pressure across the surface.
Before starting your project, ensure the surfaces to be joined are clean and free of debris. Always use a drill bit slightly larger than the rivet diameter (typically 3.3mm for a 3.2mm rivet) to ensure smooth insertion. These rivets are compatible with standard manual or pneumatic rivet guns. To maintain the integrity of the joint, store the rivets in a dry environment to prevent surface oxidation, and avoid exceeding the grip range of the 8mm length to prevent deformation or failure of the joint.
