Dulux Trade Weathershield Quick Dry Opaque - Black - 1L

Dulux Trade Weathershield Quick Dry Opaque is suitable for exterior wood surfaces, including doors, windows, and joinery.

For optimal protection, apply two coats of Dulux Trade Quick Dry Opaque.

It is recoatable in 2 hours. Drying time depends on temperature and humidity.

You can expect a coverage of up to 20 sq/m per liter.

The surface should be clean, dry, and free from any existing coatings, dirt, or grease. Sand the surface to provide a key before application. Bare wood must be primed.

Clean brushes with water after use.

No, this product should only be applied by brush.

It has a satin finish.

Ensure the surface was properly prepared before application. Remove loose paint, sand the surface, and reapply the product, following preparation instructions.

Ensure adequate ventilation. Check the temperature and humidity, as these can affect drying times. Make sure the paint is not too thick.

Ensure the paint was stirred thoroughly before application. Apply a second coat to achieve the desired color. Check the product's color against the label to confirm you have the correct shade.