Best current price£3.85from eBay
Shopping.co.uk recommended and popular offers
eBay£3.85Visit shop Varilight G102SS Powergrid Module Steel 10A 2-Way Switch
Visit shop
The Range£6.04Visit shop Varilight Steel 10 Amp 2 Way Switch Module - Brushed Steel
Visit shop10 offers from £3.85 - £11.34
View price history by clicking the chart icon.
This Varilight 10 Amp 2 Way Switch Module in Silver is ideal for homeowners and electricians needing to control lighting from two locations. Its key benefit is enhanced convenience and flexibility in room lighting design. A potential caveat is that it requires careful installation by a qualified person. This module provides reliable 2-way switching for standard domestic electrical systems, offering a clean, silver finish to complement modern interiors.
| Colour | Silver |
|---|---|
| Brand | Varilight |
2-way switching allows you to control a single light fixture from two different locations using two separate switches.
No, this module is specifically for 2-way switching. For controlling a light from three or more locations, you would need intermediate switches in addition to 2-way switches.
This module is rated for a maximum load of 10 amps, which is suitable for most standard domestic lighting circuits.
Generally, it fits into a standard UK single or multi-gang backbox. Ensure there is sufficient depth for wiring.
The product is described as being in a 'Silver colour family', suggesting a silver-finished switch module.
Yes, as long as the total power consumption of the LED lights does not exceed the 10-amp rating of the switch. It's always good practice to check the compatibility of dimmer switches with LED loads if dimming is required, but for standard on/off 2-way switching, it is usually compatible.
Verify that the circuit breaker is on. Check all wire connections to ensure they are secure and correctly terminated according to the 2-way switching diagram. If unsure, consult a qualified electrician.
This indicates an issue with the 2-way wiring. One of the switches may be wired incorrectly, or a wire may be loose. A qualified electrician will need to re-examine the wiring configuration.
Ensure the switch module is securely screwed into the backbox. If the internal mechanism feels faulty, the module may need to be replaced by a qualified electrician.
Setup: Installation of this 2-way switch module should only be performed by a qualified electrician. Incorrect wiring can lead to electrical hazards. The module typically fits into a standard UK single or multi-gang backbox.
Compatibility: This module is designed for use with standard 230V AC lighting circuits. It is compatible with loads up to 10 amps. Ensure that the existing wiring and the light fixture's power requirements do not exceed the module's rating.
Care: To clean the module, ensure the power supply to the circuit is switched off at the consumer unit. Use a soft, dry cloth to wipe the surface. Avoid using abrasive cleaners or solvents, as these can damage the silver finish.
