Hansgrohe Vernis Blend Basin Mixer Tap 70 - Matt Black - 71558670

No, the Hansgrohe Vernis Blend Basin Mixer Tap 70 is sold separately from the waste set and requires a compatible waste set to be purchased additionally.

EcoSmart technology limits the water flow rate to 5 liters per minute, significantly reducing water consumption and lowering your utility bills without compromising the water jet's effectiveness.

AirPower technology mixes air with the incoming water, resulting in a fuller, softer water jet that feels luxurious and reduces splashing.

ComfortZone 70 refers to the dimensions of the tap, providing a spout height of 71mm and a projection of 89mm. This offers ample space between the spout and the basin for comfortable hand washing.

Clean the finish with a soft, damp cloth and mild soap. Avoid abrasive cleaners or scouring pads to prevent damage to the surface. Dry after cleaning to maintain its appearance.

Yes, the EcoSmart technology limits the flow rate to 5L/min even at high water pressure, ensuring water efficiency and preventing excessive flow.

Hansgrohe typically offers a five-year manufacturer's warranty on their taps, subject to terms and conditions. Please refer to the warranty documentation for full details.

Check that the water supply valves are fully open. Ensure the flexible hoses are securely connected and not kinked. Verify that the main water supply to the property is active.

Check for blockages in the aerator (the end of the spout). Unscrew the aerator and clean it. Ensure the EcoSmart flow limiter is functioning correctly; this is normal for water-saving taps. Verify that there are no obstructions in the supply lines.

The ceramic valve may need tightening or replacement. Refer to the manufacturer's instructions or contact customer support.

The internal ceramic cartridge might be obstructed or worn. Clean the cartridge if accessible, or contact customer support for replacement guidance.

The aerator may be clogged with debris. Unscrew the aerator from the spout tip, clean it, and reattach it. Ensure the AirPower technology inlet is not blocked.