Setup, Compatibility & Care
Surface Preparation: Ensure all surfaces are sound, clean, and dry before application. New surfaces, in particular, must be fully dry. For old lead paints, consult the relevant safety data before preparation.
Application: Stir thoroughly before use. Apply using a brush, roller, or spray. For sealing new or bare surfaces, thin the paint with up to 1 part clean water to 5 parts paint. For normal use, add up to 1 part clean water to 10 parts paint. Conventional spray applications may require thinning up to 1:2.5 (water:paint), and airless spray up to 1:5.
Coats: Apply a minimum of one coat and a maximum of two full coats for optimal results.
Drying: Allow 4 hours for drying. Recoat after a minimum of 2 hours and a maximum of 4 hours, depending on temperature and humidity.
Tool Cleaning: Remove excess paint from equipment immediately after use and clean with water.
Storage: Store in a cool, dry place, avoiding extremes of temperature and protecting from frost. Always ask your stockist about recycling options for empty containers and dispose of any leftover paint responsibly.