Milano Alpha Horizontal Double Flat Panel Radiator - 635mm x 420mm - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and renovators seeking a stylish and durable heating solution. The Milano Alpha Horizontal Double Flat Panel Radiator offers a modern aesthetic and robust construction, delivering efficient heat output for medium-sized rooms. A key consideration is that radiator valves are not included and must be purchased separately.
All features
| Colour | White |
|---|---|
| Brand | Milano |
Extended Product Information
FAQs
Are radiator valves included with this radiator?
No, radiator valves are not included with the Milano Alpha Horizontal Double Flat Panel Radiator. They must be purchased separately.
What type of heating system is this radiator compatible with?
This radiator is designed for use with standard wet central heating systems.
How do I calculate the correct BTU output needed for my room?
You can find online BTU calculators that take into account room dimensions, window size, insulation levels, and location to help you determine the appropriate heat output. Consult a professional if unsure.
What is the T50 and T30 rating?
These ratings refer to the average water temperature within the radiator. T50 means an average temperature of 50°C, typically used for standard radiators connected to conventional boilers. T30 is a lower temperature, often used with heat pumps or condensing boilers for higher efficiency.
How do I clean the white powder-coated finish?
Clean the surface with a soft, damp cloth. Avoid using abrasive cleaning products or solvents, as these can damage the finish.
What are the dimensions of this radiator?
The dimensions are 635mm in height, 420mm in width, and 58mm in depth.
Can I install this radiator myself?
While basic installation steps can be followed, plumbing work should ideally be carried out by a qualified professional to ensure safety and proper functioning of your heating system.
Troubleshooting
Radiator is not heating up
Check that the central heating system is on and functioning correctly. Ensure radiator valves are open. If only one radiator is affected, check for trapped air and use the bleed plug to release it. If the entire system is cold, consult a heating engineer.
Radiator is making gurgling noises
This usually indicates trapped air. Locate the bleed valve (top corner) and carefully open it with a radiator key until water starts to drip out, then close it securely. Repeat if necessary.
Low heat output from one side
This could be due to uneven water distribution. Ensure both radiator valves are functioning correctly and consider balancing the system if this is a persistent issue. Trapped air is also a common cause; bleed the radiator.
Leak detected from valves or fittings
Ensure all connections, including valves and plugs, are securely tightened. If leaks persist, the seals may need replacing, or the fitting may be damaged. Professional plumbing advice is recommended.
Pros and Cons
Pros
- Durable and strong construction due to 1.5mm mild steel.
- Modern and minimalist aesthetic suits contemporary decor.
- Provides a good balance of heat output for its size.
- The white powder-coated finish is both attractive and easy to maintain.
- Includes essential installation hardware.
Cons
- Radiator valves are not included and require a separate purchase.
- Specific heat output figures (T50/T30) require understanding of heating system temperatures.
- May be too compact for very large or poorly insulated rooms.
- The weight, while indicating quality, requires secure wall mounting.
Setup, Compatibility & Care
Setup: Installation should be performed by a qualified plumber. Ensure the mounting location can support the radiator's weight (33.510263824 pounds) once filled with water. Use the provided wall fixings, blanking plug, and bleed plug. Crucially, radiator valves are not included and must be purchased separately. Connect the valves to the radiator inlets and then to your heating system pipework according to standard plumbing practices.
Compatibility: This radiator is designed for use with standard central heating systems. Ensure your boiler and pipework are compatible with the required heat output and water volume. It is compatible with various plumbing systems, but professional installation is recommended.
Care: To maintain the pristine white finish, clean the radiator regularly with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the powder coating. Periodically check the bleed valve to release any trapped air, which can improve heating efficiency.