Best current price£5.18from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£5.18Visit shop interBär 8075-008.01 Switch White Pull Off/On 2A 1Piece
Visit shop7 offers from £5.18 - £7.25
View price history by clicking the chart icon.
The interBär 8075-008.01 pull switch is designed for users needing a simple, reliable on/off control for lighting fixtures, particularly where a pull-chain mechanism is preferred. Its key benefit is providing manual, latching control for basic electrical installations. A potential caveat is its 2A rating, which limits its use to lower-power applications. This single-piece white switch offers a straightforward solution for manual lighting control.
| Colour | White |
|---|---|
| Model Part Number | 8075-008.01 |
| Brand | interBär |
This interBär pull switch is rated for a maximum of 2 Amperes (2A) at 250 Volts.
No, this is a simple on/off (latching) switch and does not support dimming functionality.
It is best suited for simple lighting applications, such as pendant lights, small lamps, or ventilation fans, where a pull-chain activation is desired.
No, this switch is designed for dry, indoor environments only.
To reset the switch, simply pull the cord again to toggle it to the desired state (on or off).
While this specific model is white, interBär offers similar pull switches in other colors like Black and Gold, and with different current ratings (e.g., 6A).
Ensure power to the circuit is on. Check all wire connections to the switch terminals for security. Verify that the connected device is functioning and within the switch's 2A rating.
Inspect the pull cord for kinks, knots, or obstructions. Ensure the cord is properly aligned with the switch mechanism. Gently clean the cord and the area around the switch entry point.
This may indicate an internal mechanism issue. Check the connected load; ensure it is not causing an unintended persistent state. If the issue persists, consider replacing the switch.
Setup: This pull switch is designed for integration into simple electrical circuits. Ensure the power is disconnected before attempting any wiring. Connect the relevant wires to the terminals provided on the switch according to standard electrical practices. The switch is intended for use in dry, indoor environments. Professional installation by a qualified electrician is recommended for safety and compliance.
Compatibility: The interBär 8075-008.01 is compatible with AC circuits operating at up to 250V and requiring a maximum of 2A. It is suitable for use with most standard lighting circuits and low-power devices. It is not designed for use with high-demand appliances or in wet conditions.
Care: To maintain the switch, periodically clean the exterior with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish. Ensure the pull cord remains clean and free of obstructions to allow for smooth operation. Regular inspection of the wiring connections is advised to ensure continued safe operation.
