Best current price£591.62from B&Q
Shopping.co.uk recommended and popular offers
B&Q£591.62Visit shop B&Q - Floor Standing 2 Door Traditional Vanity Unit With 3 Tap Hole Fireclay BasinTimeless Sand630 X 471 mm
Visit shop4 offers from £591.62 - £778.90
View price history by clicking the chart icon.
The Old London Timeless Sand 600mm Floor Standing Vanity Unit is designed for homeowners seeking to infuse their bathroom with classic, heritage-inspired elegance without compromising on modern functionality. Its key benefit is combining a timeless aesthetic with practical storage solutions, particularly in compact spaces. A potential caveat to consider is the specific requirement for 3 tap holes, which dictates tap selection. This unit features a durable fireclay basin with a 3 tap hole design, soft-close doors, a moisture-resistant cabinet constructed from FSC-certified MDF, and comes fully assembled for straightforward installation.
| Colour | Beige |
|---|---|
| Brand | Old London |
This vanity unit requires taps designed for a 3 tap hole basin. You will need a hot tap, a cold tap, and a mixer tap or a third spout.
The cabinet is constructed from moisture-resistant MDF, making it suitable for bathroom environments. However, it is not fully waterproof, and prolonged exposure to standing water should be avoided. Ensure good ventilation in the bathroom.
Yes, the handles can typically be changed as they are usually attached with standard screws. Ensure any replacement handles have compatible screw hole spacing.
The Old London Timeless Sand vanity unit comes with a 5-year manufacturer's guarantee.
No, the internal shelf is fixed and cannot be adjusted for height.
Clean the fireclay basin with a soft cloth and a mild, non-abrasive bathroom cleaner. Rinse thoroughly with water and dry with a soft cloth to prevent water spots.
The unit is 600mm wide. Specific depth and height dimensions can be found in the product's technical specifications documentation.
Check for obstructions inside the cabinet. Ensure hinges are correctly aligned and screws are tightened, but do not overtighten.
Verify the door is correctly seated on the hinges. If the mechanism appears damaged, contact the manufacturer for replacement parts under warranty.
Clean the basin immediately after use with a non-abrasive cleaner and rinse thoroughly. For stubborn marks, a mild limescale remover may be used, followed by rinsing.
Ensure the floor is level. If necessary, use shims to level the unit. Consider using wall brackets for added stability, especially in high-traffic areas.
Setup: This vanity unit arrives fully assembled, significantly simplifying installation. Ensure the floor is level and suitable for a floor-standing unit. Connect your chosen 3 tap hole taps to the basin before fitting the unit if access is difficult once installed. Secure the unit to the wall if additional stability is desired, although it is designed to be self-supporting.
Compatibility: The unit is specifically designed for 3 tap hole basin mixers. Ensure your chosen taps are compatible with this configuration. Standard plumbing connections will be required for waste and water supply.
Care: Clean the cabinet with a soft, damp cloth. Avoid abrasive cleaners or solvents, as these can damage the matt vinyl finish. The fireclay basin can be cleaned with standard bathroom cleaners; rinse thoroughly. For the soft-close hinges, occasional dusting is sufficient; no lubrication is typically required.
