JCP CONSTRUCTION PRODUCTS Shield Anchors Loose Bolt Zyp - M12 x 85/10 - Yellow

This shield anchor is designed for heavy-duty fastening in solid concrete and dense masonry, ideal for applications requiring strong, reliable load-bearing.

You will typically need a drill with a masonry bit of the appropriate size, a hammer (for tapping the anchor if necessary), and a wrench or socket set to tighten the bolt.

Yes, it is suitable for dense masonry, which includes many types of brickwork. However, always ensure the brick is solid and not crumbly.

'M12' refers to the metric thread size of the bolt (12mm diameter), and '85/10' likely indicates the bolt length (85mm) and potentially the shield length or embedment depth in a specific context.

While the anchor itself is durable, its performance outdoors depends on the surrounding environment. Protect the installation from prolonged exposure to corrosive elements for best long-term results.

Shield anchors are generally designed for permanent installation. Attempting to remove and reuse them may compromise their holding power and is not recommended for critical applications.

Ensure the hole drilled is the correct diameter and depth for the M12 anchor. Verify the substrate is solid concrete or dense masonry. Check that the item being fastened is properly aligned with the anchor.

Confirm that the hole is clean and free of debris. Ensure the drilled hole diameter is correct as per the anchor's specifications. Gently tap the anchor in if needed, but avoid forcing it.

The shield may not be fully expanded against the substrate. Ensure the hole is clean and that the substrate is solid. Re-attempt tightening, ensuring upward pull on the bolt as the nut is turned.