AQUATECH EDGE Base for Sony Alpha

The AQUATECH EDGE Base for Sony Alpha is designed for specific Sony Alpha camera models. Please refer to AquaTech's official compatibility list for the most up-to-date information regarding supported cameras.

The EDGE Base housing is designed to accommodate external strobes through appropriate ports and connectors. Check the specific port configurations and compatibility with your strobes and any required cables.

Gently wipe the O-ring and its groove with a clean, dry, lint-free cloth. Avoid using any solvents or cleaning agents. If necessary, apply a small amount of AquaTech's recommended silicone lubricant to the O-ring for optimal sealing.

No, the AQUATECH EDGE Base is the foundational model. The side handle is an optional accessory that can be purchased separately to enhance handling and control.

The depth rating for the AQUATECH EDGE housings is typically 10 meters (33 feet). Always confirm the specific depth rating for your model.

The housing is constructed from durable glass-filled polycarbonate, with controls made from stainless steel and hard-anodised aluminium for reliability in marine conditions.

After setup, perform a visual inspection of the O-ring seal to ensure it is clean and properly seated. Close the housing carefully, ensuring all safety clips are fully engaged. A brief submersion test in shallow water without the camera can also be a good practice before a full dive.

Ensure the O-ring is clean, properly seated in its groove, and free of debris. Check that no cables are pinched in the seal area. Verify that all locking clips are fully engaged.

Condensation can occur due to temperature changes. Use anti-fog inserts or ensure the housing is completely dry before sealing. Allow the housing to acclimate to ambient temperature before opening.

Check for any debris obstructing the controls. Ensure the housing is not being overtightened. Rinse the housing in fresh water after use to clear salt or sand.

Ensure you are using the correct camera plate for your specific Sony Alpha model. Check that the camera is seated correctly on the plate and that no parts are misaligned. Refer to the camera plate's specific instructions.