Sealey Rechargeable Inspection Lamp - Green - LED360G
Unique and innovative 360° swivel and tilt function enables the light source to be positioned in a...Unique and innovative 360° swivel and tilt function enables the light source to be positioned in any direction. Exclusive patented design owned by and registered to Sealey. The lamp features 8W SMD LED providing up to 600 lumens output with 120° spread of light, illuminating the whole work area. Includes an additional high power 3W LED directional torch. Features two swivel hooks and three rubber covered magnets, two on the rear and one on the end, which allow hands-free operation. High quality 2.6Ah lithium-ion battery for longer life, no memory effect and a much slower discharge than traditional Ni-MH batteries. Features a micro USB charging port and supplied with USB charging lead. Operating Time Side (High/Low)/Top: (3/6)/8hr. Charging Time: 3.5hr. Min./Max. Length: 260/280mm. Model No. LED360G. Specifications: Model No LED360G Battery: 3.7V 2.6Ah Lithium-ion Brand: Sealey Charging Time: 3.5hr IP Rating: IP54 LED Type: 8W + 3W SMD Lumen Output: Side(High/Low)/Top - (600/200)/120lm Maximum Length: 280mm Minimum Length: 260mm Nett Weight: 0.64kg Operating Time: Side(High/Low)/Top - (3/6)/8hr. Also available in Black.
This Sealey Rechargeable Inspection Lamp is designed for mechanics, DIY enthusiasts, and anyone needing versatile, hands-free illumination in tight spaces. Its key benefit is the 360° swivel and tilt function, allowing light to be directed precisely where needed, covering the entire work area with a bright SMD LED. A potential caveat is the 3.5-hour charging time, which requires some planning for continuous use.
All features
Colour
Green
Model Part Number
LED360G
Brand
Sealey
Extended Product Information
FAQs
What is the lumen output of the main light?
The main 8W SMD LED provides an output of up to 600 lumens on its high setting.
How long does the battery last on a full charge?
Operating times are approximately 3 hours on high (main light), 6 hours on low (main light), and 8 hours with the top torch.
How do I charge the inspection lamp?
The lamp features a micro USB charging port. Use the supplied USB charging lead and connect it to a standard 5V USB power source.
What is the charging time?
A full charge takes approximately 3.5 hours.
Can the light be positioned in any direction?
Yes, the lamp features a unique and patented 360° swivel and tilt function, allowing the light source to be positioned precisely where needed.
What is the difference between the main light and the torch?
The main light is an 8W SMD LED with a wide 120° spread for general illumination. The torch is a separate 3W LED providing a more directional, focused beam for detailed tasks.
Is this lamp waterproof?
The lamp has an IP54 rating, which means it is protected against dust ingress and splashing water from any direction, but it is not fully waterproof.
Troubleshooting
Lamp does not turn on
Ensure the lamp is fully charged. Connect the USB cable and check for charging indicator lights. If still unresponsive, contact customer support.
Reduced brightness or operating time
The battery may be low or nearing the end of its lifespan. Recharge the lamp fully. If the issue persists after multiple charge cycles, the battery may need replacement.
Magnets not holding securely
Ensure the surface is clean, dry, and free of debris. The magnets are strong but may not adhere effectively to painted or heavily textured surfaces.
Torch beam is weak
Check if the battery is sufficiently charged. The torch uses a separate LED, but its performance is also dependent on battery power.
Pros and Cons
Pros
Highly versatile 360° adjustable light head.
Bright main LED with a wide light spread for general illumination.
Integrated directional torch for focused tasks.
Multiple mounting options (hooks and magnets) for hands-free use.
Long-lasting lithium-ion battery with slow discharge.
Cons
Charging time of 3.5 hours may limit immediate reuse if depleted.
Main LED lumen output (600lm) might be insufficient for extremely large or very dark areas without supplemental lighting.
Operating time on high setting is 3 hours, which may not be enough for extended jobs.
IP54 rating indicates moderate protection against dust and splashes, not full waterproofing.
Setup, Compatibility & Care
Setup:
Initial Charge: Before first use, fully charge the lamp using the supplied USB charging lead and a compatible USB power source.
Operation: Press the power button to cycle through modes: Main light (High), Main light (Low), Torch, and Off.
Compatibility:
Charging: Compatible with any standard 5V USB power source (e.g., wall adapter, power bank, computer USB port).
Mounting: Magnets and hooks are suitable for metal surfaces and structures.
Care:
Cleaning: Wipe the exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents.
Storage: Store in a dry, cool place when not in use. Protect the lens from scratches.
Battery Care: Recharge the battery when the light output noticeably diminishes. Avoid prolonged storage in a fully discharged state.