Rust-Oleum Satin Furniture Paint - Fired Clay - 10ml - Orange

Not Available Rust-Oleum Satin Furniture Paint - Fired Clay - 10ml - Orange

Make sheening examples of your interior furniture with Rust-Oleum Satin Finish Furniture Paint. Th...

Currently unavailable

Colour

Orange Red

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

This guide is for anyone looking to refresh their furniture with a beautiful, satin finish using Rust-Oleum Satin Furniture Paint. The primary benefit is achieving a professional-looking finish with minimal preparation. A key thing to remember is that while priming and sanding aren't always needed, ensuring surfaces are clean and dry is essential for the best results. This guide covers everything from application tips to troubleshooting, helping you achieve a stunning finish on your furniture with ease.

All features

Colour	Orange
Brand	Rust-Oleum

Extended Product Information

FAQs

Do I need to prime before painting?

No, priming is generally not required for wood and melamine surfaces. However, priming is recommended for metal and plastic surfaces.

How many coats of paint should I apply?

Two coats are recommended for optimal coverage and durability.

Can I use this paint on outdoor furniture?

This paint is designed for interior use. Using it outdoors may result in damage.

How do I clean my paintbrushes and rollers?

Clean your brushes and rollers with water immediately after use. If the paint has dried, you may need to soak them in warm, soapy water.

What kind of finish does this paint provide?

It provides a satin, mid-sheen finish.

Can I spray this paint?

Yes, you can spray this paint. It is recommended that you dilute the paint with 10-20% water when spraying.

Is this paint safe for children's furniture?

Yes, Rust-Oleum Satin Furniture Paint is certified Toy Safe.

What is the coverage of the paint?

A 750ml tin can cover a large area depending on the surface and application. One tin should cover most small to mid-sized pieces of furniture with two coats.

Troubleshooting

Paint is not adhering properly.

Ensure the surface is clean, dry, and free of any contaminants. Lightly sand glossy surfaces for better adhesion. Use a primer if needed for certain surfaces.

Uneven finish or brush marks.

Apply thinner coats and avoid over-brushing. Use a high-quality brush or roller. If spraying, ensure proper dilution and even coverage.

Paint appears to be peeling.

Make sure the surface is properly prepared. Ensure the surface is compatible with the paint. Remove any old paint and prime before applying the new coat.

Pros and Cons

Pros

Easy to apply with brush, roller, or sprayer.
Provides excellent coverage in a single coat.
No priming or sanding required on most surfaces.
Water-based formula for easy cleanup and eco-friendliness.
Available in a wide range of colors.

Cons

Spraying requires dilution with water (10-20%).
Two coats are recommended for optimal results.
Surface must be suitably primed if not wood or melamine.
Color accuracy may vary slightly depending on the application method.

Setup, Compatibility & Care

Setup:

Preparation: Clean the furniture surface thoroughly to remove any dirt, dust, or grease. Use a degreaser if necessary.
Surface Compatibility: The paint works best on wood, melamine, and primed metal or plastic surfaces.
Application: Apply the paint using a brush, roller, or electric sprayer. Follow the instructions on the tin for best results. For spraying, dilute with 10-20% water.
Drying Time: Allow each coat to dry completely before applying the next. The drying time will vary depending on the conditions.

Care:

Clean up spills immediately with water.
Once the paint is fully cured, clean the surface with a damp cloth and mild detergent. Avoid abrasive cleaners.

Compatibility:

Ensure that the surface is clean, dry and free of contaminants before application.