Water Butt Brass Kit - Black Dial Tap + Two-Way Splitter
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Water Butt Brass Kit is designed for homeowners and gardeners looking for a durable and convenient way to manage rainwater. Its key benefit is providing a leak-free connection to water butts or rain barrels, with the added versatility of a two-way tap splitter for simultaneous hose use. A minor caveat is the specific 33mm hole requirement for the brass connector, which may not fit all existing water butt installations.
All features
| Colour | Black |
|---|---|
| Model Part Number | WB34-BRASS-KIT-009+ |
| Brand | Best4Trade-Retail |
Extended Product Information
FAQs
What size hole does the brass connector fit?
The brass connector is designed to fit a 33mm diameter hole.
Can I connect two different types of hoses?
Yes, the quick connect fittings on the two-way splitter accept standard garden hose connectors, allowing you to connect two compatible hoses.
Is the tap made of metal?
The main connector and fitting are brass for durability. The included black dial tap is typically made of durable plastic with brass-effect detailing.
Do I need any special tools for installation?
Basic tools like pliers or a wrench may be helpful for tightening the securing nut, but often hand-tightening is sufficient. PTFE tape is included for sealing.
Can I use this kit with any water butt?
This kit is compatible with water butts that have a suitable opening (approximately 33mm) for the brass connector and are designed for outlet fittings.
How do I control water flow to each hose when using the splitter?
The two-way splitter has independent valves for each outlet, allowing you to control the water flow to each connected hose separately.
What is the benefit of the brass connector?
The brass connector provides a strong, corrosion-resistant, and durable connection point for your water butt outlet, ensuring longevity and a reliable seal.
Troubleshooting
Tap is leaking at the connection point
Ensure PTFE tape has been applied correctly and sufficiently to the male threads of the brass connector before screwing on the tap. Check that the tap is screwed on tightly.
Water is leaking from the brass connector into the water butt
Verify that the washers are correctly seated on both sides of the water butt wall and that the securing nut is tightened adequately. Ensure the hole in the water butt is clean and smooth.
Low water flow from the tap
Check that the valve on the two-way splitter is fully open. Ensure the tap itself is fully opened and that there are no kinks in the connected hose.
The two-way splitter is leaking
Inspect the rubber seals on the hose connections to the splitter. Ensure hoses are securely attached. Check the valves on the splitter itself for any damage or debris.
Pros and Cons
Pros
- Provides a secure and leak-free connection for water butts.
- Brass connector ensures durability and longevity.
- Two-way splitter offers enhanced flexibility for garden watering.
- Quick connect feature on the tap simplifies hose attachment.
- Easy to install for users of varying technical abilities.
Cons
- Requires a specific 33mm hole for the brass connector.
- Tap splitter is made of plastic, potentially less durable than brass components.
- Does not include a downpipe diverter, only connects to existing water butt openings.
Setup, Compatibility & Care
Setup:
- Ensure your water butt or rain barrel has a suitable opening, ideally around 33mm in diameter, for the brass connector.
- Insert the brass connector through the hole from the inside of the water butt, ensuring the washers are correctly positioned on either side.
- Secure the connector tightly using the provided nut on the outside.
- Wrap PTFE tape around the male BSP threads of the connector where the tap will attach.
- Screw the black dial tap onto the connector. Tighten firmly but avoid over-tightening.
- Attach the two-way tap splitter to the outlet of the dial tap.
- Connect your garden hoses to the quick-connect fittings on the splitter.
Compatibility:
- The brass connector is designed for a 33mm hole.
- The tap fittings are standard BSP (British Standard Pipe) threads, compatible with most standard UK garden hoses and accessories.
- The quick connect fittings on the splitter are compatible with common hose end connectors.
Care:
- Periodically check all connections for leaks, especially after initial setup or significant temperature changes.
- Clean the tap and splitter occasionally with a damp cloth. Avoid abrasive cleaners.
- During freezing weather, ensure the tap and any connected hoses are drained to prevent damage.