Bond It Wide Gap All Weather Joint-Fill Paving Compound - Grey, 12Kg
A single component joint filling system for the simple and rapid pointing of paved areas with join...A single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application. A unique blend of polymers and aggregates that bind together chemically. On exposure to the atmosphere Joint-Fill forms a stable, solid, mass that is unaffected by the weather once cured. Remains permeable and allows rain water to pass into water course reducing puddling. Eliminates the need for sand/cement pointing! For pointing paving joints 5mm+. Suitable for domestic and commercial installations. Also compatible with most types of paving including natural stone, terracotta, clay, concrete and cobble stones. It is cost-effective, eco-friendly and safe to use. Ideal for patios, pathways and any paved areas and is suitable for open porch ways / covered areas. Not suitable for “V" shaped joints. Simply brush the contents into the joints and leave to set. This compound is ideal for pointing paving with joints 5mm+ and is suitable for domestic and commercial installations, inside and out.
B&Q - Wide Gap All Weather Joint-Fill Paving CompoundWide Gap Paving Pointing Joint Filler Filling Compound Stones Buff15KgFree delivery in 1–3 days£36.99Visit shop →
Product Information
Full details
This guide helps homeowners and contractors effectively use Bond It Wide Gap All Weather Joint-Fill Paving Compound for pointing paved areas with joints over 5mm. It simplifies the joint filling process, offering a durable, weather-resistant finish. Note that it's not suitable for "V" shaped joints.
All features
Brand
Bond it
Extended Product Information
FAQs
How long does it take for the compound to cure?
Curing times vary depending on weather conditions. Please refer to the product instructions for specific details.
Can I use this product on a driveway?
Yes, it is suitable for driveways and other high-traffic areas.
Is this product suitable for indoor use?
Yes, it is suitable for both indoor and outdoor applications.
What is the shelf life of the product?
Please check the product packaging for the specific shelf life information.
What tools do I need to apply the compound?
You will need a stiff brush to apply the compound and a trowel or scraper to remove any excess.
Can I use this product on "V" shaped joints?
No, this product is not suitable for use on "V" shaped joints.
How should I store the product?
Store the product in a cool, dry place away from direct sunlight.
Troubleshooting
Compound not adhering properly.
Ensure the paving surface and joints are clean, dry, and free from loose debris. Ensure the product is applied within the recommended temperature range.
Compound cracking after curing.
Ensure the compound is applied in joints of the correct depth and width and that the product is fully cured.
Puddling on the surface.
Check the permeability of the paving and ensure joints are adequately filled to allow water to drain.
Pros and Cons
Pros
Easy to apply with a brush.
Eliminates the need for sand/cement pointing.
Suitable for a wide range of paving materials.
Provides a durable and weather-resistant finish.
Allows water to permeate, reducing puddling.
Cons
Not suitable for "V" shaped joints.
Requires proper surface preparation for optimal results.
Curing time is required before use.
May require more than one application for very deep joints.
Setup, Compatibility & Care
Preparation:
Ensure the paving surface is clean and free from debris, dust, and loose materials.
Joints should be dry.
Application:
Brush the compound into the joints, ensuring they are completely filled.
Remove any excess compound from the surface of the paving.
Compatibility:
Compatible with most paving types including natural stone, terracotta, clay, concrete and cobble stones.
Not suitable for “V" shaped joints.
Care:
Allow the compound to cure completely according to the manufacturer's instructions before exposing it to heavy use or water.
Avoid using harsh chemicals or pressure washers on the treated areas.