Safeguard Soluguard Woodworm & Rot 5L - Soluguard

A 5L container covers between 15 and 20 m².

No, you must remove any existing paint or varnish before applying the treatment.

Drying times vary depending on environmental conditions but generally take several hours to a day. Ensure complete dryness before applying any further treatments or finishes.

While the product is solvent-free, it is recommended to work in a well-ventilated area and wear a mask, gloves, and eye protection for safety.

You can apply SoluGuard using a brush or a coarse spray. Ensure complete and even coverage of the timber.

While the product is HSE-approved, keep pets and children away from the treated area until it is completely dry.

Reapplication is typically not necessary unless new infestations or rot appear. Regular inspections are recommended.

Ensure thorough application and check for any missed areas. Consider a second application if necessary. Also, identify and address the source of moisture that may be contributing to the problem.

Ensure the timber surface is properly prepared. Remove any existing coatings or finishes that may be preventing penetration. Consider sanding the surface.

Ensure adequate ventilation during and after application. The odor should dissipate as the product dries.

Ensure the product is properly mixed if applicable. Clean the spray nozzle thoroughly after use. Use a suitable filter.