Burbage Iron Craft Windsor Single Garden Gate - Black - Wi03
This Windsor Low Single Garden Gate from Burbage Iron Craft is crafted from Pressure Treated Scand...This Windsor Low Single Garden Gate from Burbage Iron Craft is crafted from Pressure Treated Scandinavian Redwood, sourced from European managed forests. The gate measures W900 x H1200 mm. It features a robust frame of 70x70mm and bracing of 70x54mm & 44x44mm, with tongue and groove boards measuring 95x14mm. The gate includes a steel infill panel that is zinc and powder-coated black for a striking contrast and enhanced durability. It is treated with a general-purpose preserver offering protection against decay, mould, and blue-staining fungi, though a final finish should be applied after fitting. Please note that timber gate sizes may have slight variations due to natural shrinkage or expansion. The preserver is not a 100% decay guarantee, and periodic inspection and future re-treatment are the end user's responsibility to ensure long life, depending on factors like weather conditions and usage.
This guide is for homeowners seeking a durable and aesthetically pleasing garden gate. The Burbage Iron Craft Windsor Single Garden Gate offers a striking black finish and robust construction for enhanced security and curb appeal, though it requires a final finish for optimal longevity. Key features include its Scandinavian Redwood construction, a contrasting steel infill panel, and substantial framing for stability.
All features
Colour
Black
Model Part Number
Wi03
Brand
Burbage Iron Craft
Extended Product Information
FAQs
What is the primary material of this gate?
The gate is crafted from Pressure Treated Scandinavian Redwood.
Does the gate come with posts or hardware?
No, the gate is supplied without posts or hanging hardware, which must be purchased separately.
What is the purpose of the black steel infill panel?
The steel infill panel provides a striking visual contrast, enhances durability, and adds security to the gate.
Is the preserver a guarantee against decay?
No, the preserver offers protection but is not a 100% decay guarantee. Periodic inspection and re-treatment are the end user's responsibility.
Can I paint or stain the gate?
Yes, it is recommended to apply a final finish like paint or stain after fitting to further protect the timber and achieve your desired aesthetic.
What are the exact dimensions of the gate?
The gate measures W900 x H1200 mm (width x height).
How often should I re-treat the timber?
Re-treatment frequency depends on environmental factors, but generally, reapplying protective finishes every 1-3 years is advisable for optimal longevity.
Troubleshooting
Gate is sticking or difficult to open/close
Check for ground obstructions, ensure posts are plumb, and verify hinge alignment. Wood may expand or contract; slight adjustments may be needed. Ensure a consistent finish has been applied.
Visible signs of decay or mould
Clean affected area with a mild solution and allow to dry thoroughly. Reapply the preserver and a protective topcoat. Increase frequency of inspections and re-treatment.
Steel infill panel appears discolored
The powder coating is designed for durability. If minor surface rust appears, it can typically be cleaned with a non-abrasive metal cleaner. Ensure water does not pool on the panel.
Gate sags or appears unstable
Ensure gate posts are firmly set. Check that bracing is secure and hinges are correctly fitted and tightened. Consider adding additional support if needed.
Pros and Cons
Pros
Constructed from durable, pressure-treated Scandinavian Redwood.
Robust frame and bracing ensure longevity and stability.
Attractive contrasting black steel infill panel.
Pre-treated for initial protection against common timber issues.
Sustainably sourced materials.
Cons
Requires a final finishing coat after installation for full protection.
Timber sizes may have slight natural variations.
Preserver is not a 100% decay guarantee; requires periodic inspection.
Additional maintenance (re-treatment) is the end-user's responsibility.
Setup, Compatibility & Care
Setup:
Ensure gate posts are securely installed and plumb.
Mount the gate using appropriate heavy-duty hinges, allowing for a slight gap around the gate for expansion and contraction.
Install a suitable latch or lock mechanism.
Apply a final coat of exterior-grade paint, stain, or sealant to all surfaces, paying close attention to cut ends and edges. Allow the finish to dry completely before use.
Compatibility:
This gate is designed to be hung from posts (not included) or existing sturdy structures.
Requires compatible hardware such as hinges and latches, typically available separately.
Care:
Periodically inspect the gate for signs of wear, rot, or insect damage.
Clean the gate surface with a damp cloth as needed. Avoid harsh abrasive cleaners.
Reapply protective finishes every 1-3 years, depending on exposure and climate, to maintain the timber's integrity and appearance.
Ensure drainage is adequate around the base of the gate posts to prevent waterlogging.