GU10 Triple Spotlight - Brushed Chrome

No, the GU10 lamps are not included and must be purchased separately. The fixture requires three GU10 lamps, with a maximum wattage of 50W each.

Yes, you can use LED GU10 bulbs provided they are compatible with 230V mains voltage and do not exceed the 50W maximum rating per head. Dimmable LED bulbs can be used if you wish to control the brightness.

Each spotlight head can be manually adjusted. They offer 350 degrees of rotation and 90 degrees of tilt. Gently move the head to the desired position.

The maximum wattage for each individual GU10 lamp is 50W.

This spotlight is designed for commercial and domestic indoor use. It does not have an IP rating for outdoor or wet area protection.

The finish is brushed chrome, which is a metallic silver-grey with a matte, textured appearance.

Please refer to the retailer or manufacturer's warranty information for the specific warranty period and terms. This guide does not include warranty details.

Check that the mains power supply is switched on. Verify that the circuit breaker or fuse for the circuit is not tripped. Ensure all GU10 lamps are correctly installed and functioning. Check all wiring connections are secure.

The issue is likely with the specific lamp or its connection. Try replacing the non-working lamp with a known working one. Check the connection of the lamp within its holder.

This can be caused by a loose lamp or a faulty lamp. Ensure lamps are fully seated. If using dimmable lamps, check compatibility with your dimmer switch and ensure the dimmer is suitable for LED or halogen GU10 lamps.

Turn off power and re-secure the mounting bracket to the wall or ceiling using appropriate fixings. Ensure the surface is solid enough to support the fixture.