Regatta Bayletta Hooded Waterproof Jacket - Blue

Isotex 15000 is a waterproof, breathable, and windproof fabric technology used by Regatta. The '15000' rating indicates its performance level: 15,000mm hydrostatic head for waterproofing and 15,000 g/m²/24 hours for breathability.

Refer to the Regatta sizing guide available on their website. Measure your chest, waist, and hips and compare these measurements to the chart. Consider if you prefer a closer or looser fit, especially if you plan to wear thick layers underneath.

The jacket is designed for waterproofing and wind resistance. For cold weather, it is recommended to layer a warm insulating mid-layer (like fleece or a down vest) underneath to provide warmth.

The frequency depends on usage and environmental exposure. It's advisable to re-waterproof when you notice water is no longer beading on the surface, typically after several washes or significant wear. Using a re-waterproofing spray or wash-in treatment after washing helps maintain performance.

The taffeta lining (60 gsm) offers a smooth, slick feel that allows the jacket to slide easily over other garments. The jersey lining (130 gsm), often found in specific areas like the hood or collar, provides a softer, more comfortable feel against the skin.

Yes, the jacket's waterproof, breathable, and wind-resistant properties make it suitable for hiking in wet or windy conditions. However, for strenuous activities, the breathability rating should be considered, and layering is key to managing temperature.

The Durable Water Repellent (DWR) finish may have worn off. Wash the jacket according to care instructions and then re-apply a DWR treatment (spray or wash-in) and tumble dry on low heat to reactivate.

Ensure the jacket is clean and free of dirt or body oils, which can clog the breathable pores. Wash using a liquid detergent and rinse thoroughly. If the issue persists, the breathability might be compromised over time.

Check the drawcords for any debris or salt crystals. Gently clean the area and ensure the toggle mechanism is not damaged. If necessary, a silicone-based lubricant can be applied sparingly to the cord channel.

Ensure the fabric is not caught in the zipper teeth. If the zipper is stiff, rub a graphite pencil tip along the teeth or apply a small amount of wax or silicone-based zipper lubricant.