Tetroseal Underbody Sealant has been specially formulated to protect vehicles against corrosion, r...Tetroseal Underbody Sealant has been specially formulated to protect vehicles against corrosion, rust, stones, salt and water, extending the vehicle life and helping to maintain value. Tetroseal is a technologically advanced, highly structured underbody sealing compound which is particularly resistant to sagging when applying and provides excellent sound deadening qualities. DIRECTIONS FOR USE Ensure the surface to be treated is dry and free from old flaking underbody sealant, loose rust, dirt & grease. Mask off grease nipples, etc., with tape or newspaper. Apply Underbody Sealant with a 7cm brush all over the underside of the vehicle, leaving about a 2mm coating. After 2-3 hours, a second coat can be applied if desired CAN BE APPLIED TO: Door sills, under wings, wheel arches, boot lids & engine bonnets. To completely seal the car against drumming, apply a coat inside the door panels and on the bare metal floor of the car. To remove Tetroseal Underbody Sealant from paintwork, wipe off immediately with white spirit. Tetroseal Underbody Sealant protects vehicles against corrosion, rust stones, salt, and water extending life and helping to maintain value. The underbody sealing compound is particularly resistant to sagging when applying. ADVANTAGES Suitable for use on Door sills, underwings, boot lids & engine bonnets Provides excellent sound deadening qualities Ease of application APPLICATION Ensure the surface to be treated is dry and free from old flaking underbody sealant, loose rust, dirt & grease. Mask off grease nipples, etc. with tape or newspaper. Apply Underbody Sealant with a 7cm brush all over the underside of the vehicle, leaving about a 2mm coating. After 2-3 hours, a second coat can be applied if desired.
This guide is for vehicle owners and DIY enthusiasts looking to protect their vehicles from rust and corrosion using Tetroseal Underbody Sealant. The sealant provides a protective barrier against the elements, extending the life of your vehicle and maintaining its value. However, it's essential to properly prepare the surface before application for optimal results.
All features
Colour
White
Brand
Tetroseal
Extended Product Information
FAQs
Where can I apply Tetroseal Underbody Sealant?
You can apply it to door sills, under wings, wheel arches, boot lids, engine bonnets, and inside door panels.
How do I prepare the surface before application?
Make sure the surface is dry, free from old flaking sealant, loose rust, dirt, and grease. Mask off grease nipples and other sensitive areas.
How thick should the sealant coating be?
Apply a coating of about 2mm for optimal protection.
Can I apply a second coat?
Yes, you can apply a second coat after 2-3 hours for enhanced protection.
How do I remove Tetroseal from paintwork?
Wipe off immediately with white spirit.
Does Tetroseal provide any sound deadening benefits?