Polyvine Wood Dye - Walnut - 100Ml

Yes, it is suitable for exterior use. However, for maximum longevity, ensure you apply a compatible protective outdoor sealant over the dried dye.

Yes, it is compatible with MDF, though you should perform a test patch first as MDF absorbs liquid differently than solid wood.

The dye is touch-dry in approximately 45 minutes. Wait until the surface is completely dry to the touch before applying any wax, oil, or varnish.

Yes, the shades are designed to be intermixable so you can create a custom color that perfectly matches your decor.

Yes, the formula is low odor, making it safe and comfortable to use for indoor furniture projects.

If the wood grain raises slightly after the first coat, use a very fine-grit sandpaper to lightly smooth the surface before applying the final coat.

This is often caused by inconsistent sanding or differences in wood porosity. Sand the surface more evenly or apply a pre-stain conditioner to balance absorption.

Lightly wipe the surface with a damp cloth immediately after application to lift excess dye, or use a lighter touch on the next section.

Work in smaller, manageable sections or keep a wet edge by moving continuously across the surface without stopping mid-plank.