Harlen Woodland Damask Wallpaper - Navy Blue

Use a high-quality wallpaper paste suitable for non-woven wallpaper. Ensure it is compatible with the wallpaper's material.

Clean the walls to remove dust and dirt. Fill any holes or imperfections with filler, sand smooth, and prime the walls for optimal adhesion.

This wallpaper is suitable for areas with moderate humidity. Ensure proper ventilation to prevent excessive moisture buildup.

The wallpaper is strippable. Wet the wallpaper with warm water and allow it to soak for a few minutes. Then, gently peel it off the wall.

Check the batch number on the roll and purchase additional rolls from the same batch to ensure color consistency.

You will need a measuring tape, level, wallpaper paste, a smoothing brush or roller, a utility knife or sharp scissors, a seam roller, and a sponge.

Ensure the wall is properly prepared (clean, dry, and smooth). Use the correct type and amount of wallpaper paste. Press the wallpaper firmly to the wall, especially at the edges.

Use a wallpaper smoother to gently push out any air bubbles from the center to the edges. For persistent bubbles, carefully lift the wallpaper and reapply, ensuring proper adhesion.

Carefully trim the edges of the wallpaper to ensure a clean fit. Make sure the pattern is aligned correctly before applying the wallpaper. Overlap the edges slightly and smooth them down with a seam roller.