Best current price£89.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£89.97Visit shop B&Q - Internal Oak Pre-Finished Suffolk Fire Door2040 X 826 X 44mm
Visit shop6 offers from £89.97 - £179.97
View price history by clicking the chart icon.
The XL Joinery Internal Oak Pre-Finished Suffolk Fire Door is an ideal solution for homeowners and contractors seeking a classic, high-quality aesthetic combined with rigorous safety standards. Crafted from American white oak, this door offers a sophisticated look while providing essential 30-minute fire protection (FD30). While it arrives pre-finished for convenience, users should note that any cut-outs or trimmed edges will require site finishing to maintain its integrity and appearance.
| Colour | Brown |
|---|---|
| Model Part Number | EPFOSUF32-FD |
| Brand | XL Joinery |
No, hardware such as hinges and locks must be purchased separately and must be FD30 fire-rated to match the door's certification.
Yes, however, any trimmed edges must be sealed with a suitable wood finish immediately to prevent moisture ingress and maintain the fire rating.
The factory pre-finish is designed for durability in standard internal conditions, though it should be kept away from excessive direct moisture or heat.
An FD30 rating means the door is tested to provide at least 30 minutes of fire resistance when exposed to heat and flames.
No, this is an internal fire door and is not designed to withstand external weather conditions.
Yes, to maintain the fire certification, it must be installed with compatible fire-rated door linings and intumescent strips.
Check if the hinges are correctly seated or if the door frame has settled. Trim only the minimum amount required and reseal the exposed edge.
Ensure the fire-rated intumescent seals are installed correctly; gaps greater than 3mm should be addressed to maintain fire integrity.
Installation requires standard door fitting tools, but practitioners must ensure the use of fire-rated intumescent strips and appropriate fire-tested hinges to maintain the FD30 certification. When trimming to fit, you must apply a suitable wood finish to the exposed oak edges to prevent moisture absorption. Regular maintenance involves wiping the door with a slightly damp, non-abrasive cloth. Avoid harsh chemicals or excessive water, which could damage the pre-finished surface. Always verify that your door frame is compatible with the 44mm thickness of this model.
