Roland Microphone Cable - Gold Series - 1m

The Gold Series cables utilize 24K gold-plated Neutrik connectors and an oxygen-free copper core to provide superior signal integrity, resulting in exceptionally clear and pure audio reproduction with minimal noise.

Yes, the durable construction and excellent shielding make it well-suited for the demands of both studio recording and live sound reinforcement.

A low-capacitance design ensures that the cable can carry the full range of audio frequencies without attenuation, preserving the natural tone and dynamics of instruments and vocals.

Gently wipe the connectors with a dry, soft cloth. Avoid using abrasive materials or liquids, as these can damage the gold plating over time.

While the RMC-G3 is 1 meter, Roland offers Gold Series cables in various lengths, including 3 ft./1m (RMC-G3), 5 ft./1.5m (RMC-G5), 10 ft./3m (RMC-G10), 15 ft./4.5m (RMC-G15), and 25 ft./7.5m (RMC-G25).

Yes, this is a balanced XLR cable designed to carry microphone signals, including phantom power (+48V) from your mixer or audio interface to your condenser microphone.

The AWG wire size for this cable is 24.

Check that both XLR connectors are fully seated in their respective ports. Inspect the cable for any visible damage. Try using a different microphone cable to rule out a cable fault.

Ensure the cable's shielding is intact and that it's not damaged. Verify that all connected equipment is properly grounded. Try moving the cable away from power sources or other potential sources of interference.

Confirm the cable is fully functional by testing with another known good cable. Ensure the microphone is correctly oriented and that phantom power is applied if required by your microphone type.