Best current price£8.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£8.99Visit shop B&Q - Heavy Duty Zinc Wire Cabin Door Hook Eye Latch 200mm 8 Inch For Garden Shed Gate Window Lock Fixing Included
Visit shop1 offer from £8.99
View price history by clicking the chart icon.
The Keypak 200mm Wire Cabin Hook is designed for homeowners and DIY enthusiasts looking for a robust, reliable way to secure large gates, shed doors, and garage doors. Offering excellent reach and superior corrosion resistance due to its zinc plating, it effectively prevents doors from swinging in high winds; however, users should ensure the mounting surface is solid enough to support the extended 200mm length for optimal stability.
| Colour | Grey |
|---|---|
| Model Part Number | Wire Cabin Hook |
| Brand | Keypak |
The included screws are designed for timber. If mounting to metal, you will need to source appropriate metal-thread screws and potentially drill and tap holes.
No, this is a cabin hook intended to hold doors open or shut against wind, not a security lock for preventing forced entry.
Zinc plating significantly slows down corrosion, but over many years in coastal or extremely wet areas, it may eventually show signs of oxidation.
Yes, you can apply an exterior metal primer and paint if you wish to change the colour, but ensure the hook is cleaned and dry first.
You will need a drill for pilot holes, a screwdriver (Phillips or Pozi depending on the screw head), and a pencil to mark the mounting positions.
Adjust the position of the eyelet plate until the hook can drop into the hole without pulling the door out of alignment.
Fill the pilot holes with wood filler or matchsticks dipped in wood glue, allow them to dry, then re-drill pilot holes to provide a tighter grip.
Installation is straightforward using a standard screwdriver or a power drill with a screwdriver bit. First, ensure your door and the intended attachment point are aligned so that the eyelet sits naturally at the end of the hook without tension. Use the provided screws to fix the latch plate and the eyelet plate to your timber surfaces. If mounting into masonry, you may need to swap the included wood screws for appropriate wall plugs and masonry screws. To maintain the hook, occasionally apply a thin layer of exterior-grade machine oil to the pivot point to ensure smooth operation, and check the screws periodically to ensure they remain tight in the wood.
