Draper Exhaust Pipe Cutting Pliers - 25mm To 260mm
Exhaust pipe cutter pliers designed to cut single-wall pipes up to 83mm diameter. There are 15 ste...Exhaust pipe cutter pliers designed to cut single-wall pipes up to 83mm diameter. There are 15 steel cutting discs, and it takes just a 90 degree turn to make a complete cut, making this an ideal tool for working in confined spaces. Cutting oil is needed for effective use. Not to be used on stainless steel exhaust pipes. This tool has a spread range of 25-260mm.
This guide is for anyone needing to cut single-wall exhaust pipes, especially in tight spaces. The Draper Exhaust Pipe Cutting Pliers offer a quick and efficient way to make clean cuts up to 83mm in diameter with a 90-degree turn. Remember to use cutting oil for optimal performance; however, these pliers are not suitable for stainless steel pipes.
All features
Model Part Number
99495
Brand
Draper Tools
Extended Product Information
FAQs
What type of pipes can these pliers cut?
These pliers are designed for cutting single-wall exhaust pipes.
What is the maximum diameter pipe the pliers can cut?
The pliers can cut pipes up to 83mm in diameter.
Do I need any additional tools or materials?
Yes, you'll need cutting oil for the best performance.
Are these pliers suitable for stainless steel pipes?
No, these pliers are not suitable for cutting stainless steel exhaust pipes.
How do I maintain the cutting discs?
Regularly lubricate the cutting discs with cutting oil and clean the pliers after each use.
What is the spread range of the pliers?
The spread range is 25mm to 260mm.
Troubleshooting
Pliers are difficult to turn.
Apply more cutting oil to the cutting discs and the pipe. Ensure the pliers are correctly positioned and not over-tightened.
Cut is not clean or straight.
Ensure the pliers are perpendicular to the pipe. Check for any obstructions and make sure the pipe is securely held during the cutting process. Replace dull cutting discs.
Pliers won't cut the pipe.
Verify that the pipe is a single-wall type and within the 25mm-260mm diameter range. Check for excessive rust or damage on the pipe surface.
Pros and Cons
Pros
Cuts pipes efficiently with a minimal turn radius.
Suitable for use in tight, hard-to-reach spaces.
Durable construction ensures a longer lifespan.
Wide range of pipe sizes supported.
Easy to operate, reducing cutting time.
Cons
Requires cutting oil for effective operation.
Not suitable for stainless steel exhaust pipes.
Specific to single-wall pipes only.
May require more effort for thicker materials.
Cutting range limitations on very large diameter pipes.
Setup, Compatibility & Care
Setup:
Ensure the exhaust pipe is cool before starting.
Position the pliers around the pipe at the desired cutting point.
Tighten the pliers to secure the cutting discs against the pipe.
Apply cutting oil to the cutting discs and the pipe surface.
Turn the pliers 90 degrees to make the cut.
Compatibility:
Compatible with single-wall exhaust pipes.
Pipe diameter range: 25mm to 260mm.
Not compatible with stainless steel exhaust pipes.
Care:
Always clean the pliers after each use to remove debris.
Regularly lubricate the cutting discs with cutting oil.
Store in a dry place to prevent rust.
Inspect the cutting discs periodically for wear and replace if necessary.