Wooden Pine Framed Ledged & Braced Garden Gate - 2057 x 838 x 44 mm - Brown

The gate is crafted from natural pine wood.

This product typically includes the gate itself. Hardware such as hinges and latches are usually sold separately and should be chosen based on your specific installation needs.

For optimal longevity and to maintain its appearance, it is recommended to treat the natural pine with an exterior wood preservative, stain, or paint. Reapplication should be done annually or as needed.

Yes, the natural pine is suitable for painting or staining. Ensure you use products designed for exterior wood applications and follow the manufacturer's guidelines for preparation and application.

This refers to the construction method: 'Framed' means it has a strong border, 'Ledged' means it has horizontal planks (ledges) across the back, and 'Braced' means it has diagonal supports for added rigidity and to prevent sagging.

The dimensions of this specific gate are 2057 mm in height, 838 mm in width, and 44 mm in thickness.

The gate is designed for hinge installation on the braced side. For easier fitting, the braces should point downwards when installing hinges.

Check that the gate posts are plumb and securely set. Ensure hinges are correctly aligned and tightened. The gate's bracing is designed to keep it square; verify it hasn't been compromised.

Inspect for any obstructions around the gate opening or on the ground. Check that hinges are not binding and that the gate has not warped. Minor adjustments to hinges or post alignment may be required.

This is natural for untreated wood. Apply a suitable exterior wood treatment, stain, or paint as per product instructions to protect the pine and restore its appearance.

Tighten the screws on the hinges. If the screws no longer grip, consider using longer screws or wood filler to create a more secure anchor point.