Best current price£30.00from The Range
Shopping.co.uk recommended and popular offers
The Range£30.00Visit shop Jcp Construction Products A2-304 Stainless Steel Sleeve Anchors Countersunk Head - 8Mm/M6 X 60 (Box Of 50) - White
Visit shop9 offers from £30.00 - £57.91
View price history by clicking the chart icon.
The JCP CONSTRUCTION PRODUCTS A2-304 Sleeve Anchors are designed for professionals and DIY enthusiasts looking for reliable, heavy-duty fastening solutions in concrete and masonry. Their primary benefit is a countersunk head design that allows for a flush, aesthetically pleasing finish while maintaining exceptional structural integrity. Please note that these anchors require a pre-drilled hole of the exact specified diameter to ensure proper expansion and maximum pull-out resistance.
| Colour | White |
|---|---|
| Model Part Number | A2-304 |
| Brand | JCP CONSTRUCTION PRODUCTS |
Yes, they are suitable for solid brick and concrete, but avoid using them in hollow or lightweight blockwork.
A standard rotary hammer drill for masonry and a manual socket wrench or impact driver for tightening is sufficient.
Always check the specific packaging for the JCP product, as the drill bit size must match the outer diameter of the sleeve.
No, sleeve anchors are designed as permanent fixtures and are generally not intended to be removed and reused.
The material properties make them durable, but always verify the specific environmental ratings for the A2-304 material to ensure compatibility with your local climate.
The hole is likely drilled too large. Ensure the drill bit size matches the anchor specification exactly.
Ensure the hole is deep enough and free of drill dust/debris using a vacuum or blower.
The masonry substrate may be too soft or crumbling. Verify the material strength before installing.
To ensure proper function, always use a masonry drill bit that matches the required diameter of the sleeve anchor. Clean the dust out of the drilled hole using a brush or compressed air, as debris can prevent the sleeve from expanding correctly. When tightening, apply steady torque until the sleeve grips the substrate firmly; avoid overtightening which may compromise the expansion mechanism or strip the threads. Regularly inspect the fastener in high-vibration environments to ensure no loosening has occurred over time.
