Best current price£94.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£94.99Visit shop B&Q - Flat Single Column Radiator 1600mm X 280mm & Trv Chrome ValvesWhite
Visit shop33 offers from £94.99 - £157.99
View price history by clicking the chart icon.
This guide is for homeowners and renovators seeking an elegant and efficient heating solution. The Monstershop Flat Single Column Radiator in white offers a sophisticated aesthetic combined with robust performance, though its specific dimensions require careful placement consideration. Key features include its premium carbon steel construction, triple-layered powder coating for durability, and an integrated thermostatic valve for precise temperature control. It's designed to blend timeless style with modern functionality, providing both warmth and visual appeal to any room.
| Colour | White |
|---|---|
| Model Part Number | 5056806861319 |
| Brand | MonsterShop |
The radiator is constructed from premium 1.5mm thick carbon steel.
This model measures 1600mm in height and 280mm in width.
Yes, the radiator is backed by a 15-year guarantee.
The thermostatic valve has an adjustable range from approximately 6 to 28 degrees Celsius.
Yes, all necessary fixtures and fittings for installation are included.
Wipe clean with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals to protect the powder coating.
It uses standard 0.5" BSP inlet and outlet connections.
No, this radiator is designed for use with central heating systems only.
Check if the central heating system is on and functioning. Ensure the thermostatic valve is not set to its lowest setting or 'frost protection' mode. Bleed the radiator to remove any airlocks. Verify that the lock shield valve is open.
Air trapped in the radiator is the most common cause. Bleed the radiator following the correct procedure. If the problem persists, the lock shield valve may need adjusting, or there might be an issue with the system's water flow, requiring professional assessment.
Gently tighten the connection. If leaking persists, the valve or fitting may need to be replaced. Ensure thread sealant or PTFE tape was used correctly during installation. Professional assistance is advised.
Check if the rotary knob is functioning correctly. Ensure the valve head is not obstructed. If the radiator is constantly fully on or off regardless of the setting, the valve itself may be faulty and require replacement.
Setup: Ensure you have all included fixtures and fittings. Professional installation by a qualified plumber is recommended. The radiator connects to your existing central heating system using standard 0.5" BSP connections. The thermostatic valve and lock shield valve should be installed according to the included instructions, typically on the inlet and outlet pipes respectively. Bleeding the radiator may be necessary after installation to remove any trapped air.
Compatibility: This radiator is compatible with standard central heating systems. It uses 0.5" BSP inlet and outlet connections, which are common in most UK plumbing setups. Ensure your boiler and plumbing system are adequately sized to support the heat output required by this radiator.
Care: To maintain its pristine white finish, wipe clean with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the triple-layered powder coating. Periodically check all connections for leaks. The included cleaning brush can be used to dust the radiator's surfaces, especially between the columns.
