Best current price£658.00from Marks Electrical
Shopping.co.uk recommended and popular offers
Marks Electrical£658.00Visit shop Rangemaster HLTHDS110WH Flat White 110cm Chimney Cooker Hood - LED Lighting - 3 Speed - Touch Control HLTHDS110WH Hi Lite Flat White
Visit shop1 offer from £658.00
View price history by clicking the chart icon.
This guide is for homeowners seeking to improve their kitchen's air quality with the Rangemaster 110cm Chimney Cooker Hood in White. The key benefit is its powerful extraction capabilities, removing smoke and odors effectively. However, note that this model is designed for either ducted or recirculation use, depending on your setup. This guide covers features, setup, usage, and troubleshooting, ensuring you get the most out of your cooker hood.
| Colour | White |
|---|---|
| Energy Efficiency | B |
| Model Part Number | HLTHDS110WH |
| Brand | Rangemaster |
The charcoal filter should be replaced every 3-6 months, depending on your cooking habits.
You can clean the grease filters by hand with warm, soapy water or in a dishwasher.
Yes, this hood can be used in recirculation mode, and it comes with charcoal filters for this purpose.
This hood uses LED light bulbs.
You can control the fan speed using the touch controls on the hood. There are three speeds plus an intensive setting.
Please refer to the warranty information that came with your product or contact the manufacturer to find out the warranty period.
The maximum extraction power is 685 m³/h.
While it's possible to install it yourself, professional installation is recommended for ducted setups to ensure proper performance and safety.
Check the power supply and ensure the hood is properly connected to the electrical outlet. Check the circuit breaker.
Check the filters; clean or replace them if necessary. Ensure there are no blockages in the ducting (for ducted models).
Check the light bulbs and replace them if necessary. Consult the manual for the correct bulb type and replacement procedure.
Ensure the hood is securely mounted. Check for any obstructions in the fan. Inspect and clean or replace filters if necessary.
Ensure your hands are dry when using the touch controls. Clean the control panel with a soft cloth. Reset the hood by turning off the power for a few minutes.
