Setup, Compatibility & Care
Surface Preparation:
All surfaces must be clean, dry, and free from dust, grease, and other contaminants. Remove any old sealant or flaking coatings. For glass, metal, and aluminium, use a suitable solvent cleaner to ensure optimal adhesion. Porous surfaces, such as new concrete or stonework, may require priming; test on a small area first.
Application:
Cut the nozzle to the desired bead size. Apply using a standard sealant gun. Ensure joints are correctly sized for the sealant's capabilities. Refer to joint ratio recommendations for best results.
Compatibility:
- Adheres to: Most smooth, non-porous materials including PVCu, metal, timber, glass, and glazed surfaces.
- Not Recommended For: Aquarium manufacture (use specific aquarium sealant), bitumen or asphalt applications (use Weathermate), highly porous surfaces without priming, substrates that bleed oils or plasticisers, and the edge sealants of double-glazed units (use Silicone 450).
- Overpainting: This product is non-overpaintable.
Care:
Clean up uncured excess sealant with a damp cloth or solvent. Cured sealant can be removed mechanically by cutting or scraping. For ongoing maintenance, clean the sealed area with mild detergent and water. Avoid abrasive cleaners.