Best current price£6.89from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£6.89Visit shop Jcp Fixings Universal Plugs 10 X 60Mm - Fjnup10060 - Box Of 50 5014196005461
Visit shop
The Range£6.99Visit shop Jcp Fixings Universal Plugs Suitable For Hollow Or Solid Base - 10 X 60Mm (Box Of 50) - Silver
Visit shop6 offers from £6.89 - £7.99
View price history by clicking the chart icon.
The JCP Fixings Universal Plugs (10 x 60mm) are designed for both professional tradespeople and DIY enthusiasts who require a reliable anchoring solution for a variety of surfaces. These plugs offer the key benefit of extreme versatility, working effectively in both hollow and solid base materials like brick, concrete, and plasterboard. While these plugs are highly dependable for light trade and domestic applications, users should note that they are specifically sized at 10mm and require a corresponding drill bit, making them unsuitable for precision work that demands smaller diameter hardware.
| Colour | Cream |
|---|---|
| Model Part Number | FJNUP10060 |
| Brand | JCP Fixings |
While these plugs can be used in plasterboard, ensure the load is light to moderate and does not exceed the structural capacity of the plasterboard itself.
You must use a 10mm drill bit for the 10x60mm variant to ensure a snug fit.
They are suitable for general use, but for exterior environments exposed to extreme weather, ensure the screws used are corrosion-resistant.
The pack contains 50 units of the 10x60mm cream-colored plugs.
No, just a standard power drill with a 10mm bit and a screwdriver to drive the screw into the plug.
The hole may be too large or the masonry material is crumbly. Use a smaller drill bit next time or apply a filler to the hole before inserting the plug.
Ensure you are using the correct screw diameter for a 10mm plug and check that the hole is drilled to the full required depth.
To install these plugs, begin by drilling a hole in the target surface using a 10mm masonry or wood bit depending on the material. Ensure the hole is cleared of dust and debris before inserting the plug flush with the surface. Once the plug is seated, drive your screw through the fixture and into the plug, allowing it to expand and lock into position. These plugs are maintenance-free; however, it is recommended to avoid over-torquing screws to prevent damaging the plastic material or stripping the internal grip of the plug.
